Single Hung Windows

Single Hung Windows in Palm Beach Gardens, FL | TruePane Windows & Doors

Single hung windows are the workhorse of Florida replacement glazing. A fixed upper sash and an operable lower sash in laminated impact glass make this the profile you see on more Palm Beach Gardens homes than almost any other. We install them across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, cut and ordered to your openings. TruePane Windows & Doors has been replacing and upgrading windows in Palm Beach Gardens long enough to know which configurations hold up on canal-front lots and which ones don’t. Call (772) 794-8169 and we’ll walk you through a quote.

Call (772) 794-8169

Product Overview - Single Hung Windows

Single hung windows split the difference between simplicity and hurricane readiness. The top sash stays fixed. The bottom sash slides up to ventilate. Only one moving sash means fewer wear points, fewer air-infiltration paths, and a cleaner look on stucco and CBS construction, which is what most of Palm Beach Gardens is built from.

Architecturally, the profile suits the region. You’ll see it on 1970s ranch houses in Palm Beach Gardens, on newer Mediterranean-style builds off PGA Boulevard, and on mid-rise condo replacements where the association wants a uniform elevation. It reads traditional but performs like modern impact glazing.

The structural core of these units is the laminated impact glass. A PVB interlayer sits between two panes, so if wind-borne debris strikes the window, the glass fractures but stays in the frame. The opening remains sealed. That’s the difference between a broken window and a breached building envelope during a storm.

TruePane Windows & Doors orders each unit for the specific opening and wind zone, so your single hung windows arrive cut to size and ready for a level, plumb, square installation. No field improvisation. No shim stacks hiding a bad measurement.

Technical Specifications

All single hung impact windows we quote in Palm Beach Gardens are configured from these options:

• Frame materials: Aluminum, Vinyl
• Glass options: Laminated Impact Glass (PVB interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
• Finish options: White, Almond, Bronze, Black, Tan
• Screen options: Half Screen, Full Screen
• Design pressure: Matched to your wind zone, up to +/-100, never higher
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements

Sizes are cut per opening. We don’t stock a warehouse of standard units and hope your rough opening matches. Every quote starts with an on-site measure in Palm Beach Gardens, so the numbers on your order match the numbers on your wall.

Hurricane & Compliance Performance

Laminated Impact Glass
The glazing uses a PVB (polyvinyl butyral) interlayer that holds the glass in the frame under impact. Even if the outer lite cracks, the interlayer keeps the pane intact and the weather barrier closed. That’s the point of impact glazing, and it’s standard on every single hung unit we quote.

Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval number, issued per configuration. We verify the specific numbers on your quote, so when the Palm Beach Gardens building department asks for documentation, it’s already in your permit packet.

FBC / HVHZ Compliance
These windows are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. HVHZ isn’t a marketing badge. It’s the code chapter that governs glazing in Palm Beach County, and it has stricter testing and anchoring rules than anywhere else in the state.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. When a manufacturer posts a Miami-Dade NOA, this is the testing battery behind it. We’re glad to walk you through what each test simulates.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. A window rated far above your zone costs more and buys you nothing. A window rated below your zone fails inspection. We spec to the actual requirement, calculated for your specific structure height and exposure category in Palm Beach Gardens.

Energy Performance
Low-E and insulated glass options are available for thermal performance. Florida cooling loads are brutal from May through October, and the right glass package meaningfully reduces solar heat gain. Ask about Low-E when you call the office at (772) 794-8169.

Color & Glass Options

Finish selection in Palm Beach Gardens tends to follow the architecture. White and almond dominate the older ranch and villa stock. Bronze and black are common on contemporary builds and recent renovations around Downtown Palm Beach Gardens and Alton. Tan fits the Mediterranean and Tuscan-style communities where the stucco runs warm.

Glass choice follows exposure. Clear laminated impact glass is the straightforward, cost-effective option. Tinted glass cuts afternoon glare on west-facing walls. Low-E insulated glass is the pick when the room gets direct sun and the air conditioning runs constantly. We’ll ask about room orientation when we walk the project, because west-facing glass in Palm Beach Gardens is a different animal than north-facing.

Screens are available in half or full configurations. Half screens keep sightlines clean on windows where only the bottom sash ventilates anyway. Full screens are the better call when you want the whole opening covered when the window is open.

Installation by TruePane Windows & Doors in Palm Beach Gardens

An NOA-rated window is only as good as its installation. The approval covers the manufactured unit. The anchoring, sealing, and flashing are on the installer. That’s who you’re really hiring.

We run a pre-install inspection on every opening in Palm Beach Gardens before ordering. That’s when we catch rotted bucks, cracked stucco returns, or an out-of-square rough opening that would otherwise turn into a hidden problem after the window goes in. The unit gets ordered to the corrected measurements.

On install day, we set every window level, plumb, and square. We use AAMA low-expansion foam (AAMA 812) for the perimeter seal, installed per AAMA 2400/2410 practice. That foam creates the air and water seal between the frame and the rough opening, and the low-expansion formula won’t bow the frame or distort the jambs. Anchoring follows the manufacturer’s NOA requirements for your substrate, whether it’s CBS, wood frame, or steel stud.

After the sealant cures, we run a water test on the perimeter. Then final cleanup and a walkthrough. Palm Beach Gardens is an HVHZ jurisdiction, which means the permit office expects impact documentation and the inspector expects the fasteners and sealant to match the submitted drawings. We’ve built enough windows in this city to know exactly what they’re looking for. Improper installation compromises the NOA-rated system, full stop. If the seal fails, water gets in. If the anchoring is light, the window leaves the wall under load. Professional installation isn’t an upsell, it’s the reason the window works.

Frequently Asked Questions - Single Hung Windows

Get a Quote - Single Hung Windows in Palm Beach Gardens

Replacing your windows is a decision you make once and live with for decades. Start with a free on-site measurement at your Palm Beach Gardens home. We’ll inspect the openings, spec the right configuration, and hand you a written line-item quote with the phone number to reach us at (772) 794-8169. Call today and let’s get your project on the schedule.

Written by the team at TruePane Windows & Doors, serving Palm Beach Gardens, FL.