Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Pella Custom Windows & Doors in Palm Beach Gardens: What to Know First
Pella custom windows and doors in Palm Beach Gardens typically run $1,200 to $4,800 per opening installed, depending on series, glass package, and structural work required. Most custom Pella jobs in this area take two to five weeks from order to install, though we complete a fair number of repair and retrofit jobs in a single visit. As an independent Pella service provider, we quote the work honestly up front and register both warranty layers in writing before our truck leaves your driveway.
If you own a Pella home in PGA National, Mirasol, Old Palm, or anywhere along the Gardens corridor, this page is written for you. We’ve worked on Pella Architect Series, Lifestyle Series, Impervia, and Encompass units up and down the Treasure Coast, and we know what holds up in this salt air and what does not. For a straight answer on your Pella windows or doors, call (772) 794-8169.
How Pella Products Fail - and How We Fix Them
Every window brand has its own way of wearing out. Pella products are well engineered, but Palm Beach Gardens humidity and hurricane cycles expose weak points that homeowners in drier climates never see. Here is what we find on Pella jobs in this area:
- Architect Series wood-clad sash rot at the bottom rail. We see this on north-facing exposures and anywhere sprinkler overspray hits the frame. The aluminum cladding protects the face, but water wicks into the end grain at the sill joint. We cut out the rot, splice in new wood, re-clad, and reseal. In heavy cases we replace the sash outright. It is a repair, not a bandage.
- Lifestyle Series roll-form screen tracks that bind after salt buildup. These tracks are fine in a dry climate. In Palm Beach Gardens, the salt in the air settles into the track channels and creates drag. Owners complain the screen “fights back” by July. We pull the screen, clean the track with the right solvent, lube the rollers, and adjust the tension. The fix usually takes under an hour.
- Impervia fiberglass frame warping on oversized custom shapes. Impervia is tough, but oversized trapezoids and circles put stress on the corners. We have measured out-of-square frames on units that were installed too tight against the rough opening. The fix is re-shimming and re-flashing, not a new window, in most cases. The old installer left the frame fighting the house.
- Encompass series failed glazing beads on south-facing glass. The Encompass line uses a snap-in glazing bead that gets brittle under constant UV and heat cycling. Once the bead cracks, the glass shifts and the seal fails. We replace with a higher-grade bead material and re-bed the glass. It is a parts-level fix, but most homeowners get quoted for full sash replacement.
- Between-the-glass blinds in Architect Series doors that jam in the down position. The tilt mechanism inside the glass is the weak point. It was never designed for the heat inside a west-facing Palm Beach Gardens door panel. We can sometimes free the mechanism by working the tilt rod carefully. If the internal gears are stripped, the only real fix is a new door panel with a redesigned tilt assembly.
Our Pella Custom Windows & Doors Process
Here is how a Pella job goes with TruePane, from first call to cleanup:
- 1
You call (772) 794-8169. A live person answers. Always. Not a callback form, not a voicemail tree. We ask about the symptoms, the age of the unit, and the orientation of the wall it is on.
- 2
We schedule a measure. Our technician arrives in uniform, measures every opening twice, and checks the rough opening for signs the original install was off. If it was, that goes in the notes because it changes the fix.
- 3
We give you the options on paper. OEM Pella parts are right for newer units and warranty-adjacent work. For out-of-warranty older units, a quality aftermarket part often makes more sense on price. We quote both side by side so you can see what you’re buying.
- 4
The work happens. We protect the floor, remove the affected unit or component, and do the repair or replacement. We do not rush, and we do not leave a mess behind.
- 5
We test everything in front of you. Open, close, lock, inspect the seal. If the pane is not true, the job is not done. That rule comes from Dale Kessler and it has not changed in years.
- 6
We register both warranty layers in writing before we leave. You get the durations stated on paper. No verbal promises. The Done Right Promise covers our workmanship, no fine print, no arguing.
What Pella Custom Windows & Doors Costs in Palm Beach Gardens
Here are honest ranges for the Pella work we do in Palm Beach Gardens. These reflect what homeowners in this market actually pay, not what a national lead-gen site wants you to click on:
| Job Type | Typical Range (Installed) |
|---|---|
| Pella sash replacement (standard size) | $600 - $1,200 per sash |
| Pella custom shape window (circle, trapezoid, arch) | $1,500 - $3,800 per unit |
| Pella sliding door replacement | $2,200 - $5,500 per door |
| Pella French door with side lites | $3,500 - $8,000 per opening |
| Glazing bead repair, seal replacement, track rebuild | $250 - $850 per unit |
| Full retrospect on an existing custom Pella install | $1,800 - $4,800 per opening |
What moves the price is the opening size, whether shims and flashing need redoing, and whether we are salvaging the existing frame or replacing it. If a job requires a permit, we pull it. The quote we hand you is the number on the bill. Call (772) 794-8169 for your free estimate. We will tell you what it costs before we tell you what to buy.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for Pella Work
Most of our Pella customers in Palm Beach Gardens have called someone else first. They got a bid that was too low to be real, or a crew that did not understand why a Pella unit needs different handling than a generic vinyl window. Then they called us. We have been doing this work since 2008, started by second-generation glazier Dale Kessler, who grew up off Northlake Boulevard and still thinks of this town as a place where people remember who did right by them.
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI, so we are not married to any one brand. If a Pella replacement is not the smartest money for your situation, we will tell you that to your face and quote the alternative on paper. We register both warranty layers in writing, we stand behind the work for 90 days with our Done Right Promise, and a live person answers the phone 24 hours a day, 7 days a week. If you call at midnight with water coming through a Pella door, you get a person, not a recording.
FAQs
Yes, and we do it carefully. We work as an independent Pella service provider, which means we are not bound by Pella’s service network or scheduling. We perform warranty-safe repairs using OEM Pella parts when the warranty requires them, and we document everything so your claim stays valid. Call (772) 794-8169 if you want a straight answer on whether your specific issue is covered.
Most custom Pella orders in our area take two to five weeks from order to install. Repair work on existing units is usually completed in a single visit. If you need something faster, ask us about in-stock alternatives from lines we carry and install, because sometimes a comparable non-custom unit can go in the same week.
It depends on the age of the unit and what makes sense for you. For units under warranty or recent installs, we use OEM Pella parts. For older, out-of-warranty Pella windows, a quality aftermarket component can do the same job for less money. We quote both on paper and explain the trade-off in plain English, so you decide with full information.
No. If it is not in the written scope, it is not in the price. That is a rule at TruePane, and it has been since Dale Kessler founded the company. If we open up a wall and find something unexpected, we stop and talk to you before we do anything else. You approve every change in writing before we proceed. Call (772) 794-8169 for a quote you can hold us to.
We serve Palm Beach Gardens and the surrounding area, including PGA National, Mirasol, Old Palm, BallenIsles, and north along the Treasure Coast. If you are within reasonable driving distance of Palm Beach Gardens, it is worth a call. A live person answers 24/7 and will tell you directly whether we can get to your job.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After