Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMarvin Window Replacement: The Palm Beach Gardens Owner’s Guide
If you own a Marvin window in Palm Beach Gardens and a sash, balance, or glass unit has failed, we stock the replacement parts and install them for a typical installed cost of $275 to $1,800 depending on the component. Most single-part swaps, like a balance or weatherstrip set, run $275 to $550 installed. Full insulated glass unit replacement for a Marvin Ultimate or Elevate window generally lands between $600 and $1,800 depending on size and Low-E coating. We carry Marvin-compatible parts on our trucks, and in most cases the swap is done in one visit.
How owners usually discover the problem: a sash that drops three inches when you let go, condensation you cannot wipe off because it is between the panes, or a crank that spins without moving the sash. By the time a Palm Beach Gardens homeowner calls us, the window has usually been fighting them for a year. That is normal. They do not fail overnight. They fail slowly, and most people live with it longer than they should.
Which Marvin Models This Applies To
We work on the full Marvin residential line: Ultimate, Elevate, Signature, and the older Integrity series, plus the Marvin clad wood windows installed in Palm Beach Gardens homes from the 1990s through today. The parts we replace most frequently are balances (the spring-loaded mechanism inside the frame jamb), sash locks, tilt latches, weatherstrip sets, and insulated glass units where the seal has given out.
The compatibility gotcha with Marvin is this: the window’s hardware type is stamped on a small tag or sticker on the top edge of the operating sash, and the balance style changed between the Integrity and Elevate generations. A homeowner who orders a balance online without checking that stamp often receives a part that looks right in the photo and does not fit in the jamb. We match parts by the window’s series, the sash width, and the stamp code, not by a guess based on a picture. If you can read us the code off the top rail, we can usually confirm the right part before we arrive.
On the OEM versus aftermarket question: Marvin hardware is well-built, and where the maker’s part is available at a fair price, that is what we quote. But there are quality aftermarket balances and weatherstrip sets made specifically for Marvin’s jamb profiles that perform as well as factory parts. We quote both when there is a meaningful price difference, on paper, side by side, so you see exactly what you are buying before we touch the window. TruePane is an independent service provider and not affiliated with Marvin; we simply know the line well.
Signs Your Marvin Window Replacement Is Failing
- Sash drops or will not stay open. The balance mechanism inside the jamb has lost tension. On Marvin windows in Palm Beach Gardens, the heat and salt air accelerate spring fatigue, and a balance that worked fine in year twelve can give out in year fifteen.
- Fog or condensation between the panes. The insulated glass unit’s seal has failed. South Florida humidity means any breach in that seal shows up fast as interior fog that will not wipe clean.
- Hard to lift, or the sash grinds on the way up. The pivot pins or the jamb liner track have worn out of true. Forcing the sash just gouges the track deeper and makes the eventual repair more involved.
- Draft you can feel around the frame even when closed. Weatherstrip has compressed or torn. In Palm Beach Gardens, a failed weatherstrip does not just raise your electric bill; it lets damp air sit against the wood frame.
- Crank turns but the window does not move, or the hinge is loose. The operator gear has stripped or the fold-away hinge has slipped. This one is common on casement and awning units that get opened daily.
Replacement Cost & What’s Included
In Palm Beach Gardens, a Marvin window replacement part with installation runs about $275 to $1,800, and here is what drives the spread:
- Balance replacement: $275 to $450 installed per sash, including both balances and testing the window through a full open-close cycle.
- Weatherstrip set replacement: $225 to $375 installed, full perimeter of the operating sash.
- Insulated glass unit replacement: $600 to $1,800 installed depending on sash size, glass type, and whether it is a standard Low-E unit or a heat-mirror style Marvin used on some higher-end lines.
- Sash lock and tilt latch replacement: $150 to $250 installed, including realignment so the sash seats properly.
Every quote includes the part, the labor, the trip, and disposal of the old component. There are no surprise line items on the invoice. The Keystone Standard means both warranty layers get registered in writing before our truck leaves your driveway, and the Done Right Promise covers the workmanship. If the window is not right, we come back and make it right. No paperwork fight.
DIY or Call Us?
A homeowner can safely check one thing before calling: whether the visible screws and latches are tight and whether the sash moves freely in the track without grinding. That is diagnostic. The actual removal of a Marvin sash and replacement of a spring balance is work I would not recommend to an owner, because the jamb liner is under tension and a slipped pry tool can gouge the jamb or break the liner tab, turning a $350 balance job into a $900 jamb rebuild. The same goes for insulated glass units; Marvin sashes use specific glazing beads and setting blocks, and a mis-seated unit will bind or break a month later.
If you are in Palm Beach Gardens and the window is failing, call (772) 794-8169. We will match the part to your series, quote the job on paper, and in most cases finish the swap the same visit. Free estimate, no pressure, and the price does not change once we start.
FAQs
A well-installed Marvin window in South Florida should give you 20 to 30 years on the frame and hardware, but the insulated glass unit seal often fails between years 12 and 18 because of the combination of heat, humidity, and salt air we get here in Palm Beach Gardens. The good news: a failed seal does not mean you need a new window. We replace the glass unit itself for a fraction of the cost of a full window replacement. Call (772) 794-8169 and we will give you an exact number.
Sometimes a balance can be re-tensioned rather than replaced, and a sticky sash can be cured with a proper clean and re-lube of the jamb track. But weatherstrip that has torn and glass that has fogged are replace-only components; there is no repair path that holds up. We will tell you straight which category your window falls into when we look at it, and the estimate is free.
Most single-part swaps, like a balance, lock, or weatherstrip set, take 45 minutes to an hour and a half from the time we set up to the time we run the sash through its cycle. An insulated glass unit replacement takes longer because the new unit has to be measured, ordered, and set properly, but the install itself is typically a half-day appointment in Palm Beach Gardens. Call (772) 794-8169 for a time estimate based on your specific model.
Our trucks carry the Marvin-compatible balances, locks, and weatherstrip sizes we see most often in Palm Beach Gardens homes, so a standard swap is usually done the first visit. Custom insulated glass units and some older Integrity-series hardware are ordered to spec, and we will tell you the lead time before you commit to anything. If you need the part identified, read us the stamp code on the top edge of the sash and we can usually confirm the part over the phone.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.