Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPly Gem Door Installation in Palm Beach Gardens: What to Know First
TruePane Windows & Doors installs, replaces, and services Ply Gem doors throughout Palm Beach Gardens for homeowners who want the job done right the first time. Most Ply Gem door installations run one full day on site, and our pricing is built around a written line-item quote before any work begins, so there are no surprises on the bill. As an independent Ply Gem service provider, we are not affiliated with the manufacturer, but our technicians know these doors down to the hinge and the jamb. Call (772) 794-8169 for a free estimate.
If you own a Ply Gem entry door, sliding patio door, or French door in Palm Beach Gardens and it binds, sags, leaks, or no longer shuts square, this page tells you what is actually going on and what it costs to fix.
How Ply Gem Products Fail - and How We Fix Them
Ply Gem makes a lot of doors. We see the full range of them in Palm Beach Gardens, from older builders’ grade swinging doors to newer Premium and Pro series systems. Here is what actually goes wrong on these units in this climate, and what we do about it.
- Hinges loosening on the Premium entry door line. The screw holes in the factory jamb are threaded for the screw, not the wood behind it. In South Florida humidity, the dado around those holes swells and shrinks seasonally. The screws back out. The door sags and drags on the threshold. We remove the screws, fill the holes with a two-part epoxy, and re-set with longer stainless fasteners into the rough opening framing. That is the fix that lasts. It is not on Ply Gem’s website.
- Weatherstripping tearing along the bottom sweep of Pro Series patio doors. The sweep hangs on a plastic carrier that gets brittle under UV and heat. After three or four Palm Beach Gardens summers, it cracks and the door loses its seal. You will feel the draft before you see the crack. We replace the carrier and sweep as a unit, not just the rubber strip, so the door seals properly again.
- Sliding door rollers wearing flat on Great Lakes Series sliders. These rollers are steel wheels running on a steel track. The factory does not seal the housing. Salt air works its way in, the wheel flattens on one side, and the door starts to rumble and catch. We clean the track, replace the roller assembly with a sealed bearing unit, and adjust the height so the door rides true to the frame.
- French door astragals coming out of alignment on double-door units. The astragal, the center post on the passive leaf, gets knocked out of true over time from use or from a hinge losing tension. The doors then bind against each other at the top. We re-shim the astragal and reset the leaf alignment so both doors open and close independently without fighting each other.
- Cylinder locks on entry doors wearing from daily use. Ply Gem doors often use a standard cylinder that is easy to key but has a short service life under heavy use. When the key starts sticking or the deadbolt throws loose, we replace the cylinder with a heavy-duty brass unit and re-key to match your existing keys. It is a small fix that keeps the door functioning like it should.
Our Ply Gem Door Installation Process
Every Ply Gem door job in Palm Beach Gardens follows the same discipline, whether we are replacing a full frame or setting a new slab into an existing jamb. Here is how it goes.
- 1
Measure and diagnose. We measure every opening twice before ordering or cutting anything. We check the slab, the jamb, the hinges, and the threshold to see what will carry the new door and what needs to come out.
- 2
Parts decision. We quote OEM Ply Gem parts where they matter for warranty protection and fit, and quality aftermarket parts where the OEM option is a known weak point, like the Pro Series bottom sweeps. You see the difference in writing before we start.
- 3
Installation. We set the door, shim the jamb square, and anchor the frame to the rough opening. Every screw is stainless. Every shim is placed to support weight, not just fill space.
- 4
Test and adjust. We open, close, lock, and unlock the door from both sides. We check the reveal, the weatherstripping contact, and the sweep. If the door does not shut true, we re-hang it until it does.
- 5
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves the driveway. That is the Keystone Standard.
What Ply Gem Door Installation Costs in Palm Beach Gardens
Here is what you can expect to pay for common Ply Gem scenarios here in Palm Beach Gardens, based on the jobs we quote week in and week out.
- New Ply Gem entry door, mid-grade line, complete frame installation: $1,400-$2,800
- Ply Gem Pro Series sliding door, full replacement, standard size: $2,200-$4,000
- Premium French double door, complete removal and new install: $2,800-$5,500
- Slab replacement only, existing jamb in good condition: $600-$1,400
- Hardware, weatherstripping, or roller replacement on an existing Ply Gem door: $180-$450
What moves the price is the condition of the rough opening, whether the threshold needs cutting out, and the specific Ply Gem line you are matching. We give you a written line-item quote before work starts. The number on the quote is the number on the bill. Call (772) 794-8169 for your free estimate.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for Ply Gem Work
We have been working in and around Palm Beach Gardens since 2008, and the standard we hold on a Ply Gem door is the same standard we hold on every door we touch. If it is not done right, we make it right under our Done Right Promise. No paperwork. No arguing. A live person answers our phone 24 hours a day, every day. The technician at your house is background-checked and uniformed, and we act like a company that plans to be in this town in thirty years, because we do.
We also install Andersen, Pella, and PGT doors, so if a Ply Gem unit is not the right long-term answer for your opening, we can show you side-by-side quotes on paper. You see exactly what you are buying. No pressure, no pushing.
FAQs
Yes, we register both manufacturer warranty layers in writing when we install or service your Ply Gem door in Palm Beach Gardens, and we document the warranty durations before leaving the property. If you bought a home with unregistered Ply Gem products, call (772) 794-8169 and we can tell you whether registration is still possible for your specific units.
We use OEM Ply Gem parts wherever they matter for fit, finish, or warranty protection, and we recommend a quality aftermarket part only where the original design is a known weak point, such as the bottom sweep carriers on Pro Series doors. You get a written line-item quote showing which parts go where, and we explain why. That decision stays with you.
If the slab is sound, the jamb is square, and the frame shows no rot or water damage, repair is usually the better money. A hinge replacement, new rollers, or a re-shimmed astragal can add years to a Ply Gem door for a few hundred dollars. When the frame has taken on water or the door has been force-opened, replacement is the honest call. We will tell you which one you have, not which one earns us more.
For common Ply Gem entry and patio door lines, we can usually have you scheduled within one to two weeks, depending on part availability and your schedule. Custom arched or oversized units can take longer because of manufacturer lead times. We will give you a firm date in writing and we show up when we say we will.
Call (772) 794-8169 to schedule your free estimate for Ply Gem door installation in Palm Beach Gardens. One call, one appointment, one straight answer.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.