Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Tequesta
Custom window and door work in Tequesta runs $2,800 to $14,000 for most residential projects, with oversized or HVHZ-rated impact custom shapes reaching $22,000 or more. Our team measures every opening twice, quotes manufacturer lines side by side on paper, and registers both warranty layers before the truck leaves your driveway. If you’re on a canal-front street off Riverside Drive or inland near the village center, call (772) 794-8169 and a live person answers. That’s the standard, not the exception. Custom Windows & Doors done right here means meeting Florida’s High Velocity Hurricane Zone requirements, not just checking a box.
Tequesta homeowners deal with conditions a stock window from a big-box store was never built for. Salt-laden air from the Loxahatchee River inlet works on aluminum frames year-round. The original single-pane units in the CBS homes built from the 1960s through the 1980s were not thermally broken and not impact-rated. Replacing them is not an upgrade for comfort alone. It’s how you stay insurable on the coast. Tequesta sits inside the HVHZ, which changes what a compliant quote has to include. We’ll walk through that below.
Why TruePane Windows & Doors Is Tequesta’s Preferred Custom Windows & Doors Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler. Years of community service backs the work, and the founding rule stays on the whiteboard: if the pane is not true, the job is not done. That matters in Tequesta, where out-of-true aluminum frames from the 1970s are the norm on canal lots, so Tequesta Door Installation must be done right the first time. Dale set up this company because he kept seeing voided warranties and installs that failed under Florida’s wind loads. We do not repeat those mistakes on your house.
Tequesta customers tell us the same thing: the bid from the other company looked lower until they asked about HVHZ design pressures, missile-impact test documentation, and whether both warranty layers would be registered in writing. A live person answers every call for our Window Replacement in Tequesta, 24 hours a day, seven days a week. Dispatching and scheduling are coordinated from our South Florida office, and crews serve Tequesta locally. Background-checked, uniformed technicians arrive when we say they will and work in your home the way we’d work in our own mother’s.
We authorize more than a dozen manufacturer lines including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. That lets us put real options on paper, side by side, with the durations stated. We pull permits, pass inspections, and register both warranty layers before the truck leaves the driveway. The Done Right Promise covers every job. If it is not done right, we make it right. No paperwork fight, no fine print that covers neither party.
Our Custom Windows & Doors Services in Tequesta
Custom Shape Windows
Tequesta has a good share of 1960s ranch homes with eyebrow windows, radius tops, and trapezoid units that stock replacements will never fit. We build architectural shapes to match the original opening, not the closest approximate. If the sash is a half-round over a fixed panel, we measure it as a unit and order it as a unit. Custom window geometry in a coastal home still has to carry an HVHZ approval number, and ours do.
Commercial Storefront Glazing
Small storefronts along Tequesta Drive and the village center need glazing that handles daily humidity swings and the occasional tropical storm. We install and service commercial storefront systems with proper weep paths, sill flashings, and impact-rated watertight specs. A fogged or leaking storefront unit in Tequesta gets replaced with something that drains and seals the way the original never did.
Curtain Wall Systems
On larger residential and mixed-use projects near the Intracoastal, curtain wall systems carry serious wind-load requirements. In Tequesta’s HVHZ, the design pressure for a tall glass elevation is higher than what a mid-rise inland would require. We size mullions for the actual exposure, spec impact glazing where the code demands it, and coordinate structural anchors with the block or concrete substrate. A curtain wall here is an engineered assembly, not a storefront kit with extra screws.
Architectural Grilles & SDLs
Older Tequesta homes often have divided-light patterns that give the elevation its character. True simulated divided lites, or SDLs, let you keep that look with a single high-performance impact lite behind the grille. We match bar profiles and spacing to the original window so the replacement doesn’t look like a replacement. It matters on the canal streets where the original builder took the time to get the proportions right in the first place.
Oversized Glass Panels
Waterfront living in Tequesta is built around the view. Oversized fixed panels and sliding door assemblies overlooking the river or canal need glass that does double duty: big enough for the view, strong enough for the storm. We work with tempered and laminated Impact Windows & Doors in Tequesta that clear HVHZ missile testing, sized for openings that scare off lesser crews. If you want a 10-foot fixed panel facing the Loxahatchee, we’ll engineer it properly and pull the permit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tequesta
We service and install PGT, CGI, and Cws in Tequesta among our authorized lines. Each carries HVHZ product approvals that Tequesta building officials will want to see on the permit application. We stock common rollers, locks, and weatherstripping for local service calls, so a binding slider on a canal lot doesn’t wait two weeks for a part that was never ordered. When you call, we bring what the job needs the first time.
Common Custom Windows & Doors Problems We See in Tequesta Homes
- Salt-air pitting on non-marine-grade aluminum frames. Five decades of tidal air at the Loxahatchee inlet eats the anodized finish first, then works into the frame itself. Once the frame pits, the IGU seal fails, argon leaks out, and the sash fogs from the inside.
- Seized 1970s sliding glass doors on canal lots. On a canal-front street off Riverside Drive, our crew replaced a slider whose sill track had corroded so badly the panel had fused shut. The frame had debonded from the CBS wall. This is common in Tequesta and it fails home inspections immediately.
- Untested retrofit storm panels over non-impact frames. A homeowner bolts steel panels over a 1968 aluminum frame and thinks the house is protected. The panel does nothing if the frame behind it cannot carry a useful design pressure.
- Fogged single-pane replacements installed in the 1990s. Some Tequesta homes have a mix of original and mid-1990s replacements. Without a thermal break, that vintage of aluminum still sweats and still fails. The replacement cycle restarts sooner than it should.
Pricing for Custom Windows & Doors in Tequesta, FL
A standard custom window replacement in Tequesta runs $2,800 to $7,500 per opening, depending on size, glazing options, and HVHZ approvals. Oversized or impact-rated custom shapes run $8,000 to $14,000, and a full curtain wall project can push past $22,000 once structural reinforcement and engineering are included. Architectural grilles and SDLs add $300 to $900 per window, which is what a correctly matched pattern costs. On a canal-front home where every unit needs impact glazing with elevated design pressures, a whole-house replacement for a 1,600-square-foot CBS home typically lands between $35,000 and $70,000. We don’t shrink a $60,000 quote to $40,000 by omitting the permit or skipping the product approval documentation. You’ll see that line in writing. Call (772) 794-8169 for a free estimate. We’ll bring the spreadsheets and the product approvals.
We Also Serve Cities Near Tequesta
Our teams run service and install routes through Custom Windows & Doors in Tequesta and the surrounding communities: Palm Beach Gardens, Jupiter, Juno Beach, and Lake Park. If you’re a few minutes south on US-1 or just over the bridge, the same crews and the same written warranties apply. Call (772) 794-8169 and we’ll route you to the right technician.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Tequesta
Yes. A window or door replacement in Tequesta requires a building permit, and the village will want to see the product approval numbers for every unit before the close-in inspection. We pull the permit, attach the HVHZ product approvals, and schedule the inspection. If a contractor says a permit isn’t necessary for a full replacement, that’s a red flag you should not ignore. Call (772) 794-8169 and we’ll walk you through what the permit application actually contains.
Canal-front and river-front homes in Tequesta fall under the High Velocity Hurricane Zone, which requires replacement windows and doors to carry HVHZ product approvals with design pressures matched to the zone and opening location, not just the wind-borne debris region rating used a few miles inland in Jupiter or Palm Beach Gardens. The wall you’re replacing has an elevation and exposure. The engineer of record assigns the design pressure. We order units that meet it, and the documentation goes on the permit. Call (772) 794-8169 for a quote that shows the design pressures in writing.
Usually not in Tequesta. A 1960s or 1970s aluminum frame was never tested for impact-loading and was never thermally broken. Adding impact glazing to an untested frame fails the HVHZ requirement, because the frame must carry the design pressure too. You’d spend real money on glass that does not make you compliant and does not make you insurable. We replace the unit as a unit. Call (772) 794-8169 and we’ll show you what a compliant assembly actually includes.
Tequesta sits at the mouth of the Loxahatchee River where tidal water meets the Jupiter Inlet, meaning salt-laden air moves directly into residential neighborhoods year-round. Jupiter has coastal exposure too, but Tequesta’s canal network pushes marine air deeper into the village, and the result is faster pitting on non-marine-grade aluminum. That’s why we prefer marine-grade finishes and thermally broken vinyl or composite frames here. It’s a materials decision, not a marketing one.
Your insurer needs the permit, the passed inspection, the product approval numbers, and a wind mitigation inspection documenting that every glazed opening is HVHZ-compliant. The Done Right Promise and The Keystone Standard mean we register both manufacturer warranty layers in writing before we leave the driveway, and the paper trail matches what your carrier wants on file. Call (772) 794-8169 if you’re mid-policy-renewal and need a compliant estimate quickly.
If the pane is not true, the job is not done. That rule governs every custom window and door we install in Tequesta. Call (772) 794-8169 for your free estimate. A live person answers. We’ll be there when we say, quote in writing, and stand behind the work.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tequesta and South Florida.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.