Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Palm Springs
If you own a mid-century CBS ranch in Palm Springs with the original jalousie windows still in place, one thing is certain: the day you pull a permit, Palm Beach County will take a hard look at your entire opening envelope, not just the one window you wanted swapped. That’s where we come in. Our Impact Windows & Doors team has scoped, quoted, and installed compliant impact fenestration throughout this village long enough to know exactly what the inspector will flag and what the rough openings will demand. Call (772) 794-8169 and we’ll walk your property with you, measure every opening twice, and put the full scope in writing before any work starts.
Why TruePane Windows & Doors Is Palm Springs’s Preferred Impact Windows & Doors Company
We work Palm Springs the way we work everywhere: as if we’re going to be driving past these houses for the next thirty years, because we plan to be. Dale Kessler founded TruePane in 2008 on a second-generation glazier’s rule: if the pane is not true, the job is not done. That standard carries into every CBS ranch we touch here, whether it’s a two-window jalousie swap on a 1958 block home or a whole-house compliance scope triggered by a single failed bathroom louver.
Palm Springs homeowners tend to remember the contractor who left them with a fogged seal and a door that binds in July. We hear that story a lot. Our answer is the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. When you call about a wind-mitigation question or a rough-opening measurement in Palm Springs, you get a person who knows this village’s housing stock.
Our techs are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper. And they know Palm Springs well enough to tell you, before you overpay, whether that one failed jalousie is likely to cascade into a wider scope once the county inspector walks the property. More on that below.
Our Impact Windows & Doors Services in Palm Springs
Hurricane Impact Windows
Most Palm Springs calls start with one failed jalousie or one fogged 1990s insulated unit. By the time we finish the quote, we’ve usually mapped the whole house. The reason is simple: Palm Beach County’s wind-load permit requirements treat the entire fenestration envelope as one system. A hurricane-impact window replacement here is rarely a single-window job. We carry impact-rated single-hung and double-hung units sized for the non-standard rough openings common to 1950s and 1960s CBS construction, and we set them plumb, true, and flashed.
Impact Entry & French Doors
Original jalousie-panel entry doors and louvered Florida-room door walls are common throughout Palm Springs. None can be grandfathered once a permit is open. We replace them with impact-rated entry doors and French door systems that meet Palm Beach County wind-load code, and we do it without pretending the existing rough opening will accept a standard frame without modification. It usually won’t. We quote for the opening work up front, in writing, so the bill doesn’t grow on install day.
Wind Mitigation & Code Compliance
This is the service that ties Palm Springs together. A wind-mitigation inspection here often flags the exact failure modes this housing stock produces: torque-failed jalousie louvers that no longer close tight, seal-failed 1990s insulated glass, and improper flashing on CBS openings that were widened for impact frames years ago. We scope the corrections, pull the permits, and stand behind the work through the final third-party inspection. If the pane is not true, the job is not done, and a wind-mit report that won’t pass is not a finished job.
Impact Garage Doors
Garage openings on low-slope CBS ranch homes in Palm Springs are another weak point in a hurricane. We install and service impact-rated garage doors sized to the original openings, reinforcing the header and track mounting where the block demands it. Most of these jobs are quoted and completed in a single visit, with the door balanced and the track anchored before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We’re an authorized installer for more than a dozen manufacturer lines, and for Palm Springs we stock parts and lead-time options for the brands homeowners here ask about most: PGT. We quote side by side on paper so you see exactly what you’re buying, from glass package to frame finish to warranty registration. No mystery brands, no “equivalent” substitutions. If you have an existing impact frame from PGT and need a sash replaced after a storm, call (772) 794-8169 and we’ll match it before we quote it.
Common Impact Windows & Doors Problems We See in Palm Springs Homes
- Jalousie torque failure: Decades of crank use in original Palm Springs louvered windows leaves the operating hardware worn past sealing. Once louvers won’t close tight, they won’t pass a wind-mitigation inspection, and the county won’t grandfather them.
- Condensation between panes in 1990s-era insulated units: Many early insulated units installed around Palm Springs didn’t retain argon long-term. Fog between the panes is a seal failure, and once an inspector reviews the whole house, it becomes a compliance item, not a cosmetic one.
- Improper flashing on widened CBS rough openings: When impact frames are forced into original block openings without proper flashing, driven rain wicks through the jamb. Homeowners notice blistering drywall along the window edges often years after the original install.
- Non-standard rough-opening dimensions: Classic Palm Springs CBS ranches were framed for jalousies and narrow single-pane aluminum. Modern impact frames don’t share those dimensions, so a direct swap often requires widening the block opening, which changes both the labor and the permit scope.
Pricing for Impact Windows & Doors in Palm Springs, FL
A single impact-rated window replacement in Palm Springs, including permit and inspection, typically runs $900 to $1,700 per opening, depending on the glass package and the condition of the existing CBS rough opening. A full-house impact-window compliance scope on a 1,200 to 1,800 square foot ranch generally lands between $18,000 and $38,000 when jalousie removal, opening widens, and flashing corrections are factored in. Impact entry and French door replacements in Palm Springs run $3,500 to $9,500 per door system, with louvered Florida-room door walls on the higher end because the header and track work is more involved. Impact garage doors here run $2,800 to $6,500 installed, depending on width and reinforcement requirements. These numbers reflect Palm Springs’s permit-triggered, whole-envelope reality: you are rarely buying a single window, and any honest quote reflects that. We offer free estimates, written line-item quotes, and fixed pricing with no change orders. Call (772) 794-8169 and we’ll scope your house the way the county will.
We Also Serve Cities Near Palm Springs
Our crews work Palm Springs daily, and we cover the surrounding area as well: Palm Beach Gardens, Jupiter, Tequesta, and Juno Beach. If you’re in one of those communities and facing the same jalousie-to-impact compliance scope, the same Palm Springs standard applies: measured twice, quoted in writing, and installed true. Call the same number, (772) 794-8169.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Palm Springs
Yes, in most cases. Palm Beach County won’t grandfather original jalousie windows once a permit is open, and the inspector will check the whole envelope, not just the opening you touched. That means one failed bathroom louver frequently triggers a full-house impact-window compliance scope. Call (772) 794-8169 before you pull the permit, and we’ll walk the house with you so you know the full scope and price before the county does.
Because the original CBS openings were framed for narrow single-pane aluminum or jalousie units, not for the thicker impact-rated frames and laminated glass required under Florida Building Code wind-load standards. The rough opening typically needs to be widened in the block, which is structural work and part of why Palm Springs quotes include opening modifications. We measure every opening twice and quote that work up front, in writing.
It does. Palm Springs sits far enough inland that salt-air corrosion on frames is less severe than in coastal Lake Worth Beach, but the village still falls within Palm Beach County’s hurricane wind-speed zone, so your windows must be impact-rated or shutter-protected regardless. Frames here tend to hold up better cosmetically, but the code requirement is identical. The bigger variable in Palm Springs is the age of the original CBS block and how the rough openings were framed in the 1950s and 1960s.
No, not if Palm Beach County opens a permit that covers the ADU’s building envelope. Jalousies can’t be grandfathered once a permit is open, and a re-roof that touches the ADU’s fenestration will bring those windows into scope. We scope detached ADUs on Palm Springs acreage the same way we scope the main house: open every opening measurement, check septic and well setbacks if the work affects the footprint, and quote the full compliance path before you commit. Call (772) 794-8169 for a free estimate.
If we installed it, the seal failure is covered. Our Done Right Promise covers workmanship, and The Keystone Standard means both manufacturer warranty layers were registered in writing, with durations stated, before the truck left your driveway. If a unit fails within the manufacturer’s stated glass warranty, we handle the paperwork and the claim without you arguing with a third party. If the failure is on our installation, we make it right. That’s the standard, and it’s in writing.
Call TruePane Windows & Doors for Impact Windows & Doors in Palm Springs
If you’re planning jalousie replacement, a wind-mitigation compliance correction, or a full-house impact-window scope in Palm Springs, call (772) 794-8169. We’ll schedule a free estimate, walk your property with you, measure every opening, and put the line-item quote on paper. No change orders, no surprises on the bill, and both warranty layers registered before the truck leaves your driveway. You’ll get a live person on the phone when you call, and a crew that treats your house like it’s going to be in the neighborhood for another thirty years.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Palm Springs and Palm Beach County with true panes and square deals.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.