Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Window Installation: The Palm Beach Gardens Owner’s Guide
Therma-Tru window installation in Palm Beach Gardens typically runs $180-$420 per window for parts and labor, with full-frame replacements on older homes running higher. We stock Therma-Tru-compatible hardware and weatherstripping on our trucks, so most repairs are completed in a single visit. What usually brings homeowners to this page is not a broken window itself. It’s a sash that won’t close square, a crank that spins without moving the pane, or a window that suddenly lets a hot, humid draft through in August.
Therma-Tru built its name on fiberglass entry doors, but their window lines are engineered for the same reason people buy the doors: dimensional stability in heat and humidity. In Palm Beach Gardens, that matters. A wood or vinyl frame that swells in our wet season will bind. A Therma-Tru fiberglass or composite frame is designed to hold its shape. The failure point, when one shows up, is almost always in the moving hardware or the weatherseal, not the frame itself. That’s good news, because it means the repair is usually parts-only and same-day.
Key Takeaways
- Typical installed repair cost in Palm Beach Gardens: $180-$420, depending on part and access.
- Most Therma-Tru window failures are hardware or seal failures, not frame failures.
- We stock common Therma-Tru-compatible parts on the truck for single-visit repairs.
- If the frame has shifted or the sash won’t seat, do not force it. That bends the hardware and doubles the bill.
Which Therma-Tru Models This Applies To
Therma-Tru window lines include the Signature Series, the Benchmark collection, and their impact-rated coastal units, which show up regularly in Palm Beach Gardens homes built after Hurricane Andrew’s code changes took hold. The part that fits a Benchmark double-hung is not always the same part that fits a Signature casement, even when the windows look alike from the street. The safest identification is the small etched label in the corner of the glass or the printed tag on the inside of the frame. If that label is gone, we measure the sash profile and the hardware footprint, because Therma-Tru has used different balance systems across series and production years.
On OEM versus aftermarket: for balance springs, pivot bars, and weatherseal, quality aftermarket equivalents matched to the original spec hold up fine in our climate. For locking mechanisms and multi-point hardware, we prefer the OEM part. The tolerances are tighter, and the lock is the piece that has to hold against wind-load pressure during a named storm. TruePane is an independent service provider, not affiliated with Therma-Tru, but we install their products because the engineering is sound and the parts availability through our supply chain has been reliable for years.
Signs Your Therma-Tru Window Installation Is Failing
- Sash drops when you open it. The balance system has lost tension. This is the single most common Therma-Tru repair we see in Palm Beach Gardens, because constant heat cycling shortens spring life in any window line.
- Crank spins with no resistance. In a casement or awning unit, that means the operator gear has stripped. The window is not going to close tight, and forcing the crank only chews the gear further.
- Condensation between the panes. The insulating glass unit seal has failed. No repair fixes a failed seal. The glass unit gets replaced, and the existing Therma-Tru frame stays.
- Lock won’t engage or feels stiff. Either the hardware is worn or the sash has drifted out of square. In an impact-rated Therma-Tru unit, a lock that won’t fully throw is a wind-load liability, not just an inconvenience.
- Daylight visible between sash and frame when closed. Weatherseal has compressed to the point of no return, or the frame has settled. We check both before quoting a part, because new weatherseal in a racked frame will not seal.
Replacement Cost & What’s Included
For a Therma-Tru window installation repair in Palm Beach Gardens, you are looking at these ranges, installed:
- Balance system replacement: $180-$280 per window.
- Casement operator and hinge set: $220-$380 per window.
- Weatherseal replacement: $160-$240 per window.
- Insulated glass unit replacement: $300-$420 per unit, sized to the existing frame.
The range comes down to access (first floor versus second floor), whether the unit is impact-rated, and whether the hardware is a standard balance or a multi-point lock system. Every quote includes the part, the labor, the old hardware removed and hauled, and the window cleaned and tested for square operation before we leave. You get the number in writing before any work begins. If it is not in the written scope, it is not in the price, and if it is in the price, we stand behind it. That’s the Keystone Standard.
Will the price change once work starts?
No. The quote is the price. If we uncover hidden damage behind the sash, we stop, show you what we found, and give you a separate number in writing before touching anything else. No surprise line items on the bill.
DIY or Call Us?
An owner can safely check whether the part number label is still intact, whether the frame is square by measuring the diagonals, and whether the window opens and closes smoothly without grinding. That information helps us bring the right parts on the first trip. What you should not do is remove the sash or the balance hardware on your own. The balance system in a Therma-Tru double-hung is under constant tension, and the wrong move releases that tension into your hands. Same caution applies to anything involving the multi-point lock or impact-rating hardware. The risk is not worth the saved service fee.
If the window is binding, dropping, or no longer sealing, call us at (772) 794-8169. We’ll tell you what we’re likely looking at over the phone and schedule the visit. You get the price before we start, and the work is done right or it’s done again, on us.
FAQs
In Palm Beach Gardens, a properly installed Therma-Tru window with intact seals will give you 20 to 25 years of service before the frame shows meaningful wear. The hardware, especially balance systems and casement gears, typically needs replacement somewhere between year 8 and year 15 because heat and humidity accelerate wear on moving parts. The glass itself can last the life of the home unless a seal fails or a storm throws debris at it. Regular cleaning of the tracks and conservative operation extend hardware life noticeably. Call (772) 794-8169 if your windows are in that 8-15 year range and feeling stiff.
Most Therma-Tru window failures are repair issues, not replacement issues. A failed balance, a stripped operator, a worn weatherseal, or a fogged glass unit can all be addressed without touching the frame. Full replacement only makes sense when the frame itself has cracked, rotted at the corners (rare in fiberglass or composite), or shifted out of square from settling. We will tell you plainly if a repair would be throwing good money after bad. For an honest assessment, call (772) 794-8169.
A balance or weatherseal replacement takes 30 to 45 minutes per window from setup to clean-up. A casement operator swap runs about an hour. An insulated glass unit replacement takes one to two hours because the new unit has to be set, shimmed, and sealed carefully enough to hold a warranty. Most Palm Beach Gardens jobs are single-visit when the part is a common one, which is why we stock the usual Therma-Tru hardware on our trucks. Call (772) 794-8169 for a free estimate and we will tell you what to expect for your specific window.
We stock the most common Therma-Tru-compatible balance systems, weatherseal profiles, and hardware fittings on our trucks, along with parts common to the other lines we service, including PGT, CGI, and CWS. If your window needs something outside that inventory, our supplier network gets most parts to Palm Beach Gardens within two to three business days. When you call, have the part label or window dimensions ready and we can usually tell you right then whether we have it on board. Call (772) 794-8169.
Call TruePane for Your Therma-Tru Window Installation
If your Therma-Tru window is not closing right, not sealing, or not staying up, stop fighting it and call (772) 794-8169. We will give you an honest assessment, a written price, and a time we will be there. Dale Kessler grew up off Northlake Boulevard and has spent more than two decades working exclusively on windows and doors in South Florida. That’s why a live person answers our phone every call, and why we register both warranty layers before the truck leaves the driveway. Free estimates. Done right.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.