Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Palm Beach Gardens: What to Know First
Therma-Tru roof repair in Palm Beach Gardens typically runs between $175 and $600 depending on whether you’re dealing with a failed seal, a warped frame, or damage from storm debris. We complete most Therma-Tru repairs in a single visit, and we quote the full price on paper before the work starts. No surprise line items, no change orders after the fact.
If you own a Therma-Tru product and the roof or the opening around it is causing trouble, this page is written for you. It covers what actually goes wrong with these products in South Florida, what it costs to make it right, and how we handle the job. You can reach us at (772) 794-8169 any time, day or night. A live person answers.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door. That’s why we’re comfortable repairing them. But South Florida humidity, salt air, and afternoon thunderstorms expose weak points that a door in Ohio would never reveal. Here are the five failures we see most often on Therma-Tru jobs in Palm Beach Gardens.
- Sill rot and threshold failure on Classic-Craft and Fiber-Classic entry doors. Water pools at the base of the door during Palm Beach Gardens’ summer downpours, and once the sill gasket loses its seal, moisture wicks into the threshold. You’ll notice the door dragging or the weatherstrip peeling. We pull the old sill, inspect the subfloor for rot, and set a new threshold with a continuous seal bead.
- Warped fiberglass skins on Smooth-Star and Pulse series doors with direct western exposure. The afternoon sun in Palm Beach Gardens beats against west-facing entries, and dark-colored Therma-Tru skins absorb enough heat to warp. You’ll see it as a bow in the panel or a gap at the top corner. We can often correct minor warping with hinge adjustment and weatherseal replacement. Severe cases get a new slab matched to the existing frame.
- Failed compression weatherstrip around the head and jambs on Tru-Defense and Classic-Craft doors. Therma-Tru’s compression strips dry out and flatten after a few seasons of heat and humidity. When they go, you lose the insulation barrier and feel air moving around the closed door. We replace the full weatherstrip channel with OEM-spec material and test the compression before we leave.
- Improper rough opening flashing on older Therma-Tru installs. This is a Palm Beach Gardens-specific problem. Homes built in the 1980s and 1990s often have original Therma-Tru doors that were set without modern flashing tape or pan flashing. Water gets behind the brickmold, runs down the wall, and rots the jamb from the back. We remove the brickmold, inspect the framing, install proper flashing, and reset the unit. This is the repair that prevents the next three repairs.
- Seized hinge screws and stripped jamb holes on heavy Therma-Tru doors. Some Therma-Tru slabs weigh over 100 pounds. When hinge screws back out in the heat-and-cool cycle of a Palm Beach Gardens year, the door hangs on fewer threads than it should. We remove the stripped screws, set hardwood dowels or threaded inserts, and re-hang the door square.
Our Therma-Tru Roof Repair Process
Every Therma-Tru job in Palm Beach Gardens follows the same pattern. It keeps the work honest and the price predictable.
- 1
Call and diagnostic. You reach a live person at (772) 794-8169. We ask what the door or opening is doing wrong, when it started, and what you’ve tried. We schedule a time and show up when we say we will.
- 2
On-site inspection and measurements. Our technician checks the slab, the hinges, the weatherstripping, the sill, and the rough opening. We measure twice, including the reveal between the slab and the jamb on all three sides.
- 3
Parts decision. If the repair needs parts, we tell you whether OEM Therma-Tru components make sense or whether a quality aftermarket part does the same job for less. You see the cost difference on paper before we turn a screw.
- 4
The repair. We do the work in one visit whenever the parts are on the truck. That covers most weatherstrip, sill, hinge, and flashing repairs in Palm Beach Gardens.
- 5
Test and verify. We cycle the door, check the compression seal, run the threshold under water if we replaced it, and confirm the reveal is even. If it’s not, we adjust until it is.
- 6
Warranty registration and cleanup. Before we leave, we hand you a written scope of work, the warranty details, and a clean work area. The Done Right Promise applies to every Therma-Tru repair we do.
What Therma-Tru Roof Repair Costs in Palm Beach Gardens
Here are the ranges we quote most often for Therma-Tru work in Palm Beach Gardens. These are honest numbers from our actual jobs, not national averages scraped from a website.
- Weatherstrip replacement (full perimeter): $90-$180
- Threshold and sill replacement: $175-$350
- Hinge repair with threaded inserts: $120-$220
- Flashing and brickmold re-set: $300-$600 depending on framing condition
- Full slab replacement on an existing frame: $700-$1,400 depending on glass package and finish
What moves the price is usually the condition of the framing once we open the wall. That’s why we quote after inspection, not over the phone. You’ll get a written line-item estimate before any work begins. Call (772) 794-8169 to schedule a free estimate. If the pane is not true, the job is not done.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’re an independent Therma-Tru service provider, not a factory-authorized shop, and we’re fine saying that up front. What we bring to a Therma-Tru job is years of glazing and door work in this community, including PGT, CGI, CWS, and ES Windows units side by side with Therma-Tru products. Our technicians know how a Therma-Tru door should sit in a South Florida opening because they’ve corrected hundreds of bad installs.
Every repair carries the Done Right Promise. If the door is not right when we leave, we come back and make it right. No paperwork fights, no fine print. Both warranty layers get registered in writing before the truck pulls out. Dale Kessler, who founded TruePane in 2008 after growing up off Northlake Boulevard, keeps one rule on the whiteboard: if the pane is not true, the job is not done. It applies to every Therma-Tru we service in Palm Beach Gardens.
FAQs
No, using an independent service provider for a repair does not void your Therma-Tru warranty, as long as the repair does not modify the door in a way that causes the defect. We use OEM-spec parts where they matter and we register our own workmanship warranty in writing on every job.
Most Therma-Tru repairs in Palm Beach Gardens are completed in a single visit once we inspect and confirm the parts. We stock common weatherstripping, thresholds, and hinge hardware for Therma-Tru doors. A live person answers at (772) 794-8169 and we schedule a time we stick to.
If the slab is sound, the frame is square, and the failure is in the weatherstrip, sill, hinges, or flashing, repair is usually the right call. Replacement makes sense when the slab is warped beyond adjustment, the frame has widespread rot, or you want to upgrade to an impact-rated unit. We’ll tell you straight which one we’d choose for our own house.
Therma-Tru roof repair in Palm Beach Gardens ranges from $90 for a full weatherstrip replacement up to $600 when flashing needs to be re-set and framing inspected. The exact price depends on what we find when we open the wall. Estimates are free, and the quote is in writing before work begins.
Yes, most of the Therma-Tru doors we repair in Palm Beach Gardens were installed by someone else, often years ago. We start by assessing the rough opening and the existing flashing, which is where most long-term problems begin. From there, we fix what needs fixing and stand behind the work in writing.
If you have a Therma-Tru door that’s dragging, leaking air, or showing water damage around the perimeter, call (772) 794-8169. We’ll send a technician who knows the product, quotes a fair price on paper, and stands behind the work. If it is not in the written scope, it is not in the price - and if it is in the price, we stand behind it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.