Therma-Tru Shingle, Tile & Metal Roofing Nationwide | TruePane Windows & Doors

Therma-Tru Shingle, Tile & Metal Roofing in Palm Beach Gardens: What to Know First

We provide independent Therma-Tru shingle, tile and metal roofing service in Palm Beach Gardens for homeowners whose doors need fit-and-seal work tied to Florida roof loads, not a replacement sales pitch. Most Therma-Tru service calls we handle are completed in a single visit, and we quote the job on paper before any work begins so the price you approve is the price you pay. We are a windows and doors company first, which means when a Therma-Tru unit is binding or leaking at the threshold because a roof line has shifted, we fix the door the way the manufacturer intended, with both warranty layers registered in writing.

Call (772) 794-8169

This page is for Palm Beach Gardens homeowners who own a Therma-Tru entry or patio system and need shingle, tile or metal roofing work done around it without voiding the door warranty or causing a callback six months later. Call (772) 794-8169 for a free estimate from a technician who measures twice and writes everything down.

How Therma-Tru Products Fail - and How We Fix Them

• Threshold rot on Classic-Craft and Fiber-Classic entry systems. In Palm Beach Gardens, shingle roof runoff hits the entry door at a hard angle during afternoon storms. If the roof drip edge was ever installed short, water tracks down the brickmold and sits against the Therma-Tru composite threshold, which eventually wicks moisture under the corner pads and rots the sub-sill. We see this most often on homes built in the 1990s around the PGA National area. The fix is not another bead of caulk. We pull the threshold, inspect the sub-sill, replace what is soft, and re-set the unit so the reveal is correct. Then we address the roof edge that caused it.
• Sidelight seal separation on Therma-Tru 4560 Series systems with tile roof weight loading. Clay and concrete tile roofs are heavy, and over the course of fifteen or twenty years they settle. When the wall header above an entry system drops even a quarter inch, the mull joints between a Therma-Tru door and its sidelights open up. Owners notice the sidelight glass rattling or the door not latching clean. A general roof or handyman crew often tightens the door hinges and calls it done. We re-shim the entire frame assembly, re-set the mull covers, and get the door swinging true before we talk about anything else.
• Weatherstrip compression on Smooth-Star doors after metal roof installs. Standing seam metal roofs change how a house breathes. When a metal roof goes on in Palm Beach Gardens, the attic stays hotter and drier, and door frames that were absorbing humidity for years begin to shrink. Therma-Tru’s Q-Lon weatherstrip compresses differently in a dry frame, and suddenly the door that sealed fine for a decade has daylight at the corner. We re-align the panel and replace the weatherstrip with the correct profile for the new humidity pattern, which most roofers never check because it is not their trade.
• Rusting hinge screws on Therma-Tru insulated steel units near coastal Palm Beach Gardens. Homes east of US-1 in Palm Beach Gardens fight salt air constantly. We regularly see Therma-Tru steel doors where the original zinc hinge screws have rusted inside the wood stiles, especially on shingle-roofed houses where the roof overhang is shallow. The screws snap when someone tries to tighten them. We drill them out, install stainless fasteners, and re-hang the panel rather than letting a rusted screw ruin an otherwise serviceable door.
• Glass insert seal failures on Therma-Tru decorative door glass after tile roof pressure washing. Tile roof maintenance in Palm Beach Gardens often includes periodic pressure washing, and the chemical mix used around entries breaks down the butyl seal on Therma-Tru decorative glass frames sooner than anyone expects. The glass fogs at the bottom edge, then the cloud creeps upward. This is a parts-replacement job, not a door replacement. We order the correct Therma-Tru insert or a direct-glaze replacement and set it so the seal is as tight as the day the door left the factory.

Our Therma-Tru Shingle, Tile & Metal Roofing Process

1. 1
   The call. You reach a live person at (772) 794-8169. We ask what the door is doing wrong, what kind of roof is over it, and how long it has been happening.
2. 2
   The site visit. A uniformed, background-checked technician comes to your Palm Beach Gardens home and measures the unit, the reveals, and the surrounding rough opening. We check the roof edge and any signs of water movement above the door. You get a written diagnosis and a line-by-line price before we do anything else.
3. 3
   The parts decision. If the job needs factory parts, we quote Therma-Tru OEM components side by side with quality aftermarket alternatives where one exists, and we tell you which one we would put in our own house and why. You decide. We order it that day.
4. 4
   The repair. We do the work on the scheduled day, in one visit for most jobs. Thresholds get re-bedded, frames get re-shimmed and squared, weatherstrip gets replaced with the correct profile, and hinge screws get upgraded where rust is present.
5. 5
   The test. We open and close the door, check the latch throw, run the reveal measurements, and inspect the seal contact all the way around. If the pane is not true, the job is not done.
6. 6
   The paperwork. Before our truck leaves the driveway, both warranty layers are registered in writing. You get a copy. The Done Right Promise is in effect from that moment.

What Therma-Tru Shingle, Tile & Metal Roofing Costs in Palm Beach Gardens

Most Therma-Tru service and repair work in Palm Beach Gardens runs between $250 and $1,100 depending on what failed and how far the damage has traveled. Here is what we typically see:

• Threshold re-bedding and sub-sill repair on a Therma-Tru entry system: $350-$700
• Weatherstrip replacement and panel re-alignment for a metal-roofed home: $250-$450
• Frame re-shimming and mull joint repair on a sidelight system: $550-$1,100
• Decorative glass insert replacement for a failed seal: $300-$800 depending on the insert style and size
• Full Therma-Tru door replacement (when repair is no longer sensible): $1,800-$4,500 installed, depending on series, size, and glass package

What moves the price is parts availability, how far water damage has traveled into the sub-sill, and whether the roof edge above the door needs correction as part of the fix. We do not bid low and add change orders later. If it is not in the written scope, it is not in the price, and if it is in the price, we stand behind it. Call (772) 794-8169 for a free estimate on your specific door.

Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for Therma-Tru Work

Dale Kessler grew up off Northlake Boulevard and has spent more than two decades doing fit-and-seal work on windows and doors across South Florida. When a Palm Beach Gardens homeowner has a Therma-Tru door acting up under a tile roof or a shingle roofline, they get a technician who understands the whole assembly, not just the part that squeaks. Every Therma-Tru job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, and no paperwork fights if something is not right. And because we service PGT, CGI, CWS, and ES Windows as well, we can give you an honest comparison if the time ever comes to replace rather than repair. A live person answers our phone 24 hours a day, 7 days a week. We will be there when we say.

FAQs