Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Impact Garage Doors: The Palm Beach Gardens Owner’s Guide
We stock and install CGI-compatible impact garage door parts throughout Palm Beach Gardens, with most replacement jobs running between $380 and $1,900 depending on the specific component and your door series. If you’re calling about a CGI door that won’t lift, a panel that’s delaminating, or hardware that’s seized after years of salt air, we can usually have the correct part matched and on the truck the same day. The typical way homeowners discover a failed part is gradual: the door gets louder over a few months, then one morning it stops mid-travel or binds on one side. What you’re seeing is usually the wearing out of a specific, replaceable component, not the end of the door itself.
Which CGI Models This Applies To
CGI impact garage doors fall into two main families in Palm Beach Gardens: the Estate Collection, which uses heavier-gauge aluminum and larger panel profiles, and the Classic Collection, which shares many internal components but runs a thinner panel skin. The hardware sets, hinges, roller carriers, and struts are not fully interchangeable between the two. That’s the compatibility gotcha most owners run into when they buy a “CGI part” online and find it doesn’t match the mounting holes on their section. CGI stamps a serial plate on the inside of the door frame near the bottom left panel, and the series code there tells us exactly what we’re ordering. We always recommend OEM CGI components for anything structural: bottom rails, struts, end stiles, and panel sections. For non-structural wear items like nylon rollers and weather seal, we’ve had good results with quality aftermarket equivalents, but we’ll show you the difference on paper before we install either way. TruePane Windows & Doors is an independent service provider, not affiliated with CGI, and we carry a working inventory of the most common CGI replacement parts for doors installed throughout Palm Beach Gardens.
Signs Your CGI Impact Garage Door Is Failing
- Door binds or catches mid-travel. This is almost always a worn roller carrier or a hinge that’s begun to elongate its mounting holes. In Palm Beach Gardens, the salt-heavy air accelerates hinge corrosion, and a binding door usually means a hinge is twisting under load instead of pivoting cleanly.
- Visible delamination or bubbling on the panel face. CGI impact panels are laminated assemblies, and once moisture gets between the skins, the panel starts to separate. We see this most often on west-facing doors in Palm Beach Gardens that take full afternoon sun plus rain-driven humidity cycles.
- Bottom rubber seal is cracked or missing chunks. Salt and heat turn even quality EPDM seal brittle after five to seven years here. When the seal goes, you’ll feel the draft and see debris blow in under the door during the rainy season.
- Door sags noticeably on one side when open. That sag means the torsion spring is losing tension or a cable has stretched. These are high-tension parts, not something to adjust yourself, and we’ll cover that more below.
- Grinding or popping sound when the door moves. Popping is usually a roller that’s flat-spotted and no longer rolling. Grinding is metal-on-metal, typically a hinge pin that’s worn through its bushing and now chewing the surrounding material.
Replacement Cost & What’s Included
In Palm Beach Gardens, you’re looking at these installed ranges for CGI garage door parts:
- Nylon rollers (set of 10): $120-$180
- End hinges and center hinges (per set): $90-$220
- Bottom weather seal with retainer: $110-$190
- Torsion spring replacement (pair): $280-$480
- Reinforcement strut (per section): $150-$300
- Single replacement panel: $450-$900
- Complete door hardware kit (hinges, rollers, brackets): $380-$750
Every quote includes the part, the labor to remove and reinstall it, and proper torque on all fasteners. We register any manufacturer coverage in writing before the truck leaves your driveway, and our Done Right Promise covers the workmanship, not just the part. If it’s not done right, we make it right without paperwork fights. The range depends on your door’s series, panel width, and whether the struts need to come off to reach what failed. You’ll see the line-item quote before any work begins, and that price is the price.
DIY or Call Us?
Here’s where we draw a hard line: torsion springs and lift cables on a CGI impact garage door are under enough tension to seriously injure a person. Do not attempt to adjust or replace them yourself. Leave springs, cables, and anything connected to the spring anchor to a trained installer. What you can safely check yourself is the visible hardware: look at the hinges for white corrosion dust around the pins, check the rollers for flat spots, and run your hand along the bottom seal to feel for tears. If you find any of those, that’s a straightforward swap, and we’re glad to do it for you. If you’re in Palm Beach Gardens and not sure which category your door’s problem falls into, call us at (772) 794-8169 and describe it. We’ll tell you honestly whether it needs a service call or just a visual check the next time you’re in the garage.
FAQs
Plan on 7 to 10 years for rollers, hinges, and weather seal in our coastal climate, and 8 to 12 years for torsion springs under normal use. Salt air and afternoon heat shorten those numbers compared to inland Florida, and doors on west-facing exposures tend to need hardware first. Call (772) 794-8169 if your door is in that age range and starting to sound rough, and we’ll give you an honest read on what’s left in it.
Most wear items, including rollers, hinges, and seals, are replacement-only once they’ve failed; there’s no way to rebuild a flat-spotted nylon roller or a hinge with an elongated pin hole. Some hardware can be tightened and re-lubricated as a holdover, but that’s delaying the work, not repairing it. For an exact recommendation on your specific part, call us at (772) 794-8169 and we’ll talk you through what you’re seeing.
Most single-part replacements take 45 to 90 minutes once we’re on site. A full torsion spring pair is about an hour, and a panel replacement runs two to three hours because the surrounding sections have to be supported and re-aligned. We’ll give you a time window before we arrive, and we’ll be there when we say.
Our Palm Beach Gardens service trucks carry the common CGI hardware: rollers, hinges, seals, and spring sets for the Classic and Estate lines. If you have a panel or custom-width strut that needs replacing, we order that direct and schedule the install once it arrives, which is usually within a week. Call (772) 794-8169 with your door’s serial plate info and we’ll check inventory while you’re on the phone.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.