Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Palm Beach Gardens: What to Know First
We provide independent CGI shingle, tile and metal roofing in Palm Beach Gardens, with most inspections completed within one to two business days and repairs scheduled the same week. We’re not the cheapest bid, and we won’t pretend to be. What we offer is a written scope, OEM or quality aftermarket parts priced out side by side, and a Done Right Promise on every job. This page is for Palm Beach Gardens homeowners who own a CGI product and want the work done once, correctly. Call (772) 794-8169 for a free estimate.
How CGI Products Fail - and How We Fix Them
CGI builds a solid product, but no product survives South Florida forever. Here’s what we actually see on CGI units in Palm Beach Gardens homes, along with what we do about it.
- CGI Sentinel Series shingle roofs: sealant breakdown at the ridge intersections. The Sentinel line holds up well to wind, but the factory-applied sealant at hip and ridge transitions dries out after eight to twelve years in the Palm Beach Gardens sun. Once that sealant cracks, water gets under the shingle tabs and rots the decking from the top down. We strip the old sealant, re-bed with a marine-grade polyurethane, and match the shingle profile so the repair doesn’t read as a patch.
- CGI Estate Collection tile roofs: cracked barrel tiles from impact, not age. Palm Beach Gardens gets its share of falling fronds and the occasional golf ball. The Estate Collection’s barrel profile is beautiful, but it concentrates impact at the crown. A single cracked tile lets water sit against the underlayment and eventually stain the ceiling. We replace the tile with a profile-matched piece, re-seat it, and check the underlayment before we call it done.
- CGI Milano flat tile: efflorescence at the water table is not just cosmetic. The Milano’s low profile pools water at the first course above the flashing. Those chalky white deposits are minerals leaching out, and they mean water is working its way into the tile body. Left alone, the tile spalls and the roof loses its rated uplift resistance. We install a weep screed detail at the water table, replace affected tiles, and treat the exposed edge so the problem doesn’t return.
- CGI metal roofing panels: fastener backout on the coastal-adjacent runs. Homes in the western sections of Palm Beach Gardens, where the afternoon sea breeze hits hard, show metal panels working their fasteners loose over repeated thermal cycles. When the gasket under the fastener head compresses, the panel can lift and leak. We re-torque or replace fasteners with a higher-gauge gasket, correct any panel alignment drift, and tighten the strap spacing where it’s come out of tolerance.
- CGI impact-rated assemblies: a nail-pop in the deck is a shingle killer, and we find it early. On re-roofs where CGI shingles were installed over older decking, we regularly see nail pops along the truss lines. Under the heat load of a Palm Beach Gardens summer, those pops telegraph through the shingle and create a pinhole entry point. We remove the shingle course, re-secure the deck, add a reinforcing patch, and re-install shingles with a staggered seam so the repair doesn’t align with the original failure.
Our CGI Shingle, Tile & Metal Roofing Process
Here’s how a CGI job runs from first call to final cleanup, straight from the whiteboard Dale Kessler keeps in the shop.
- 1
Call and schedule. A live person answers. We book a time and show up when we say we will.
- 2
Inspection. We walk the roof, photograph every area of concern, and write down measurements. No estimate without eyes on the actual roof.
- 3
Parts decision on paper. We present OEM and quality aftermarket options side by side with prices. You see exactly what you’re buying before you pay for anything.
- 4
Written scope. If it’s not in the written scope, it’s not in the price. No amendment, no surprise line item on the final bill.
- 5
The repair and the test. We do the work, then water-test the repaired area. If the test fails, we’re not done.
- 6
Guarantee and cleanup. We walk you through what we did, leave the site clean, and back the work with the Done Right Promise.
What CGI Shingle, Tile & Metal Roofing Costs in Palm Beach Gardens
Here’s what homeowners in Palm Beach Gardens can expect to budget for common CGI roof repairs. These are honest ranges that reflect parts and labor for the conditions we see here, not national averages stripped of local context.
- Single cracked barrel tile replacement: $175-$350 per tile with underlayment check
- Ridge sealant strip and re-bed (typical Palm Beach Gardens home): $500-$1,100
- Fastener backout correction on a CGI metal panel run: $400-$900 depending on run length and access
- Shingle course replacement with deck reinforcement: $550-$1,550 depending on square footage and truss condition
- Full-roof inspection with written report and photos: $195, credited toward work if we do the repair
What moves the price: roof slope, access (two-story homes with steep pitches cost more), and whether we’re matching a discontinued CGI profile. Call (772) 794-8169 for an exact quote. Estimates are free, and the quote you get is the quote you pay.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Palm Beach Gardens and the surrounding communities since 2008 through Dale Kessler’s heritage, and we plan to be here in thirty years more. That means we don’t walk away from a callback. Our Done Right Promise covers the workmanship, and The Keystone Standard means both warranty layers are registered in writing before we leave the driveway. When a CGI homeowner calls us, they get a background-checked, uniformed technician who measures twice and explains what they’re seeing in plain language. And because we’re an authorized installer for more than a dozen manufacturer lines including PGT, CWS, ES Windows, and ECO Window Systems, we understand how CGI fits in the broader picture of a South Florida home.
FAQs
No, working with an independent CGI service provider does not automatically void your warranty, provided the repair does not alter the original installation in a way that the warranty explicitly prohibits. We’re not affiliated with or authorized by CGI, which means we make our recommendations based on what will hold up best in Palm Beach Gardens conditions, not on what protects a factory relationship. We document every repair with photographs and a written scope so you have a clear record.
Most common CGI shingle, tile and metal profiles are available through our suppliers within three to five business days. Discontinued lines or specialty profiles can take two to four weeks. We’ll tell you the lead time at the estimate, not after you’ve signed. Call (772) 794-8169 and we’ll check availability while you’re on the phone.
If the damage is isolated to one or two areas and the rest of the roof has at least five years of rated life left, repair almost always makes sense. If the underlayment is failing across multiple slopes or the fasteners are backing out across the entire roof, replacement starts to look like the better long-term move. We’ll show you the numbers for both and let you decide, with no pressure either way.
In most cases, yes. We carry a broad range of CGI profile matches and can source discontinued colors through our supplier network. If an exact match isn’t available, we’ll tell you before any work begins and show you the closest alternative side by side. You never get a surprise patch that’s two shades off.
Most single-area repairs take four to six hours on site. A full ridge re-bed on a three-bedroom Palm Beach Gardens home typically runs a full day. We’ll give you a firm schedule at the estimate, and we’ll be there when we say.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.