Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Palm Beach Gardens: What to Know First
CWS custom and geometric windows in Palm Beach Gardens typically need either a specialist glazier to restore the original unit or a full replacement when the frame or laminate has failed. TruePane Windows & Doors provides independent CWS service in Palm Beach Gardens, with most custom window repairs completed in a single visit and honest pricing given before any work begins. We’re not the cheapest bid, and we won’t pretend to be. What you get is a written scope, both warranty layers registered in writing, and a Done Right Promise on every job.
This page is for homeowners in Palm Beach Gardens who own CWS windows and want someone who understands the brand’s geometry work, its laminate layer, and what actually fails on curved and shaped units after years of South Florida sun. If that’s you, call (772) 794-8169 and you’ll get a live person, not a voicemail tree.
How CWS Products Fail - and How We Fix Them
CWS windows are known for their architectural lines and big geometric openings, but they have specific failure points that show up in Palm Beach Gardens time and again. Here’s what we see most often.
- Laminate clouding on CWS 8800 series shaped units. The laminated glass inside CWS geometric windows is held together by an interlayer that starts to fog or cloud when the edge seal is compromised. On arched and radius windows, the seal tends to fail at the tightest curve first because that’s where the laminate is stressed most during manufacturing. We replace the insulated glass unit with a new laminated lite cut to the exact radius, not a squared-off substitute that changes the sightline.
- Water intrusion at the sill of CWS radius windows. Curved and geometric windows have more perimeter seal per square foot than a standard rectangle, which means more linear feet where a factory weep system can clog or a corner seal can separate. In Palm Beach Gardens, afternoon downpours find these failures fast. We remove the old glazing, reset the unit with new setting blocks, re-seal the perimeter with a commercial-grade sealant rated for South Florida UV, and re-test the weep path before we call the job done.
- Frame deflection on oversized CWS openings. Oversized custom windows, especially those spanning eight feet or more, can develop a slight belly in the frame over time. The glass doesn’t crack, but the sash starts to bind and the lock no longer lines up. We shim and square the frame, reset the glass, and adjust the hardware so the window operates the way it did when it was installed. If the frame has moved too far, we’ll tell you straight and quote a replacement rather than patching a problem that will come back.
- Condensation between panes on CWS fixed geometric units. This is the classic sealed-unit failure: the desiccant inside the spacer bar is saturated, and the inert gas fill has escaped. On a CWS triangle or trapezoid window, the fix is a new custom-cut insulated unit, not a band-aid. We order IGUs to the exact shape and thickness of the original, which keeps the warranty on the frame intact and the sightlines consistent across the wall.
- Fogged or delaminated CWS impact units on coastal-adjacent Palm Beach Gardens homes. Impact-rated CWS glass carries a laminate layer that resists windborne debris, but if the edge seal fails, that same layer can trap moisture between the laminate and the glass. The result looks like a permanent smear behind the glass. We replace the entire IGU with a like-rated impact unit so the window still meets the codes that Palm Beach Gardens inspections require.
Our CWS Custom & Geometric Windows Process
Every CWS job follows the same steps, whether it’s a small transom repair or a full replacement of a curved window wall. Here’s how it works.
- 1
Call and talk to a person. You call (772) 794-8169. A live person answers, takes your address, and asks enough questions to understand what you’re seeing. We schedule a time that works for you, and we show up when we say we will.
- 2
Measure twice, diagnose on site. Our technician measures the opening twice before quoting a replacement or ordering parts. On CWS geometric windows, we’re checking the radius, the frame square, and the seal condition. We don’t measure from old hardware, and we don’t trust a previous installer’s numbers.
- 3
Parts decision: OEM or quality aftermarket. Some CWS parts, like certain corner keys and weep covers, are only available as OEM. For sealed units and laminate lites, we source from manufacturers who cut to CWS tolerances. We’ll explain what we’re using and why, in language you can check, before we order anything.
- 4
The repair or replacement. We remove the old unit, prep the opening, and set the new glass or part. For impact-rated openings, we document the ratings on our work order so you have a record of what’s in your wall.
- 5
Test and verify. We operate the window, check the weep path, inspect the seals, and clean the glass. If the pane is not true, the job is not done.
- 6
Warranties registered, promise in writing. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing with durations stated. Our Done Right Promise covers the workmanship. You get a written scope and a final price that matches it.
What CWS Custom & Geometric Windows Costs in Palm Beach Gardens
Pricing on CWS custom and geometric window work in Palm Beach Gardens depends on shape, size, and whether we’re repairing or replacing. A sealed-unit replacement on a standard-radius CWS window runs between $450 and $900. A full replacement of a large CWS impact-rated geometric window, where the frame has failed or the opening is oversized, typically runs $2,400 to $6,200 per unit installed. Repairs on hardware, seals, and weep systems are less, usually $180 to $420 per opening.
What moves the price: impact rating, the radius and number of curves, frame material, access (second-story or over a stairwell costs more to work safely), and whether the opening requires any re-flashing. We give a written line-item quote before any work starts, so if it’s not in the written scope, it’s not in the price. Call (772) 794-8169 to schedule a free estimate.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for CWS Work
We’ve been serving local communities since 2008, and Dale Kessler grew up off Northlake Boulevard, close enough to the old groves that he still thinks of Palm Beach Gardens as a working town first and a resort town second. We learn the trade, we hire local, and we train apprentices into journeymen. We’re not a franchise playbook.
Every CWS job is backed by our Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves the driveway. Our technicians are background-checked and uniformed, and they measure every opening twice. We also install and service more than a dozen manufacturer lines including PGT, CGI, ES Windows, and ECO Window Systems, which means if your CWS unit is beyond repair, we can show you a like-for-like replacement quote side by side, on paper, with honest numbers.
FAQs
As an independent CWS service provider, we don’t process CWS warranty claims directly, but we do document every failure we find with photos and measurements so you have what you need to pursue a claim. If the warranty won’t cover the repair, we’ll quote the fix honestly and stand behind it with our Done Right Promise.
Yes. We order replacement glass cut to the exact radius and dimensions of the original CWS unit, so sightlines and glass thickness match your existing windows. If the exact laminate is no longer manufactured, we’ll tell you before ordering and show you the nearest match on paper.
It depends on the age of the unit and the condition of the frame. If the frame is square and the hardware operates, a sealed-unit replacement is almost always the better value. If the frame has deflected or the laminate is delaminating, replacement makes more sense. We’ll give you both numbers and let you decide. Call (772) 794-8169 and we’ll schedule a free estimate.
Most repairs and single-unit replacements are completed in one visit once the replacement glass or parts arrive. Custom-cut IGUs for CWS geometric shapes usually take one to two weeks from order to installation. We’ll give you a written timeframe before you commit to anything.
Yes. We regularly service CWS impact-rated units in Palm Beach Gardens, and we replace failed glass with like-rated impact glazing so your window continues to meet South Florida code. We document the ratings on the work order so you have a record for insurance and inspection purposes.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.