Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Palm Beach Gardens: What to Know First
PGT custom and geometric windows in Palm Beach Gardens run $1,200 to $4,800 per opening installed, depending on the shape, glass package, and whether the unit carries an impact rating. Most custom-shaped PGT orders take three to six weeks from template to install, and we handle the measuring, ordering, and warranty registration on your behalf. If you own PGT windows and need a shaped replacement or a new custom opening, this page tells you what to expect and what it costs.
We’re TruePane Windows & Doors, and we’ve been setting PGT glass in Palm Beach Gardens for over four decades. Call (772) 794-8169 for a free estimate or to talk through a specific window that’s giving you trouble.
Key Takeaways
- PGT custom shapes (arches, circles, trapezoids, oversized rectangles) are special-order, not stock units, and lead time matters more than labor.
- Most PGT custom window failures we see are seal related, not frame related, and the fix is often simpler than a full replacement.
- We are an independent PGT service provider, not a PGT factory arm, which means we quote OEM and equivalent aftermarket options side by side on paper.
- Every job gets both warranty layers registered in writing before we leave the driveway. If it’s not done right, we make it right.
How PGT Products Fail in Palm Beach Gardens - and How We Fix Them
PGT makes a solid window. The failures we see in custom and geometric shapes around Palm Beach Gardens are rarely about the frame falling apart. They’re about seal stress, glass curvature, and the particular humidity cycle of coastal Florida. Here’s what we encounter most often:
- Fogged or hazy glass on PGT WinGuard shaped units. WinGuard impact windows carry a heavy laminated glass package. When a shaped unit, like a half-round or an eyebrow arch, gets glazed under slight frame torque, the seal flexes. Palm Beach Gardens humidity does the rest, and within a few years the insulated glass unit starts to fog at the edges. The fix is an exact-fit replacement IGU, glazed with the same panel alignment PGT intended, not a cleaned-and-resealed patch that fails again next summer.
- Micro-cracks radiating from the corner of a PGT 770 or 870 series radius window. Geometric windows concentrate stress at corners, and radius glass cut too close to the corner weakens over time. On older 770 aluminum units, we’ve found hairline stress fractures that homeowners mistake for impact damage. The real cause is often installation bind or an undersized shim pack. We re-true the rough opening, cut the replacement to spec, and bed it so the corner isn’t carrying the frame load.
- Failed corner welds or dried sealant on PGT ClassicVue custom trapezoids. ClassicVue frames are welded at the corners, but trapezoids and parallelograms put uneven shear force on those welds. After ten to fifteen years of Palm Beach Gardens sun and salt air, the corner sealant shrinks and the weld line starts to weep. We grind, clean, and re-weld where the frame allows it. When the extrusion is compromised, we order a new frame and re-glaze, which is usually the smarter five-figure avoided repair.
- Stuck or dragging sashes on PGT Sable series shaped windows. The Sable line uses a narrower profile that looks sharp on custom shapes but gives less room for roller and balance hardware. If a Sable arch or hexagon window won’t open smoothly, the pivot hardware is usually worn, not the track. We replace pivots and balances with correct-rate parts and re-tension the window so it operates the way PGT designed it.
- Leaking at the fin or buck on PGT custom picture windows installed over stucco. We see this on homes built in the 1990s and early 2000s along Northlake Boulevard and up toward PGA National, where original flashing was minimal and stucco caps didn’t shed water the way current code requires. The glass doesn’t fail. The perimeter does. We pull the trim, correct the flashing plane, and reinstall the unit so the window outlasts the stucco repair.
On every one of these jobs, we quote OEM PGT parts and quality aftermarket alternatives side by side on paper. Sometimes the aftermarket part has a longer real-world life than the original. You should see both numbers before you decide. If it is not in the written scope, it is not in the price - and if it is in the price, we stand behind it.
Our PGT Custom & Geometric Windows Process
Here’s how a PGT custom or geometric window job runs with us, from first call to final walkthrough:
- 1
Call and talk to a person. A live person answers at (772) 794-8169, 24 hours a day. You tell us what you’re seeing, where the window is, and whether it’s original to the house. We set a time and show up when we say.
- 2
Measure and diagnose on site. Every opening gets measured twice. Our technician checks the frame for square, the reveal for evenness, and the glass for seal integrity. On a custom shape, the template is drawn on site, not pulled from the old unit.
- 3
Line-item quote, OEM vs aftermarket. You get a written quote that shows the replacement glass or window cost, the labor, the parts, and which warranty covers what. No lump sums. No surprise line items later.
- 4
Order and register. We place the PGT order with the exact glass package and grid pattern you want. Both warranty layers are registered in writing before the truck leaves your driveway, with duration stated on the paperwork.
- 5
Install the window true. New or replacement, we set the frame level and square, shim properly, waterproof the perimeter, and bed the glass with clean sealant lines. We don’t rush the cure time.
- 6
Test and walk you through it. We operate the window with you standing there, check the seal with a moisture meter and visual inspection, and leave your property clean. Then the Done Right Promise kicks in: if it’s not right, we make it right, no paperwork fight.
What PGT Custom & Geometric Windows Costs in Palm Beach Gardens
Here’s what we typically quote for PGT custom and geometric work in Palm Beach Gardens. These are installed price ranges, not glass-only prices:
- Replacement sealed glass unit for a fogged shaped window (half-round, 30-40 inches): $650-$1,100
- Full replacement PGT custom window, non-impact (circle, arch, trapezoid, 36-48 inches): $1,200-$2,400
- Full replacement PGT WinGuard impact custom window (shaped, 36-48 inches): $2,200-$4,800
- New construction custom opening, including permitting and framing (oversized arched or geometric unit): $3,000-$7,500+
- Hardware replacement and re-work on a stuck PGT shaped sash: $180-$420
What moves the price: impact glass versus non-impact, the size of the shape, whether we’re matching an existing grid pattern, and how much perimeter waterproofing the opening needs. Call (772) 794-8169 for an exact quote on your window. The estimate is free, and it will be line-itemed so you know exactly what you’re paying for.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for PGT Work
We’ve been working on Palm Beach Gardens homes since 2008, and we still answer the phone with a person, not a menu. Our technicians background-checked, uniformed, and trained to know the difference between a PGT WinGuard seal failure and an installation issue that looks like one. If a PGT part is backordered and your window can’t wait, we quote alternatives from CGI, CWS, ES Windows, and ECO Window Systems so you’re never left with a tarp over a hole. Every job carries our Done Right Promise on top of whatever warranty the manufacturer provides, and both warranty layers are registered in writing, with durations stated, before we leave your driveway. Dale Kessler is a second-generation glazier who grew up off Northlake Boulevard and still thinks of Palm Beach Gardens as a working town first. If the pane is not true, the job is not done.
FAQs
If the frame is intact and only the glass seal has failed, we just replace the insulated glass unit. Often on a half-round or arch, the glass itself is the only part that’s gone, and the frame has years of life left. If the frame is warped, welded corners are cracked, or the window no longer holds square, replacement is the smarter call. Call (772) 794-8169 and we’ll tell you which one you’re looking at before you spend a dollar.
On a PGT unit still under the factory warranty, we’re careful to service it in a way that doesn’t void the manufacturer’s coverage. As an independent PGT service provider, we can’t claim to be a PGT-authorized shop, but we know what the warranty language requires and we document the work. A bad seal repair done wrong is what usually voids coverage, not the repair itself. We’ll tell you honestly whether the job makes more sense through the PGT warranty channel or through us.
A custom-shaped PGT order usually takes three to six weeks from template to delivery, depending on the glass package and whether it’s an impact unit. A replacement glass-only order for a standard PGT sash typically takes one to two weeks. Call (772) 794-8169 and we’ll give you a realistic window for your specific unit before you commit.
No. The quote we hand you is the quote we honor. We write every line item out before work begins, and if we find hidden water damage or a framing issue, we stop and show you what we found before doing anything else. The Done Right Promise covers the workmanship, and the price doesn’t drift. Call (772) 794-8169 for a free estimate and you’ll see the number on paper before you sign anything.
Yes. Oversized openings are regular work for us, and we order oversized PGT units with the right glass thickness and frame reinforcement for the wind load in Palm Beach Gardens. We pull permits when the job requires it, and we don’t skip the engineering. Call (772) 794-8169 and we’ll measure the opening twice and quote it properly.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.