Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Roof Replacement & Installation in Palm Beach Gardens: What to Know First
PGT roof replacement and installation in Palm Beach Gardens runs $1,200 to $4,800 for most residential jobs, and we complete the work directly, not through subcontractors. We’re an independent PGT service provider, which means we diagnose what’s actually failing, quote OEM and quality aftermarket options side by side on paper, and register both warranty layers before our truck leaves your driveway. If you own a PGT product that’s failing at the roof line, you’ll get a straight answer on the first call at (772) 794-8169. This page is written for Palm Beach Gardens homeowners who need to know exactly what’s wrong, what it costs to fix, and who will still answer the phone if it’s not right.
How PGT Products Fail - and How We Fix Them
PGT builds a solid product, but South Florida heat, salt air, and hurricane cycles find the weak points in any installation. Here’s what we see most often at the roof line in Palm Beach Gardens homes:
- PGT WinGuard roof-mount assemblies losing seal at the curb. The aluminum frame expands and contracts through 40-degree daily temperature swings between August afternoons and air-conditioned interiors. Over ten or fifteen years, the original sealant at the roof curb breaks down and water finds the gap. We remove the old unit, inspect the curb for rot, replace any compromised wood, and reset the assembly with a two-stage sealant system rated for South Florida UV exposure.
- PGT PremierVue skylight glass showing internal fogging. This is a failed insulated glass unit, and it’s not repairable in place. The seal between the panes has let humid air in, and the desiccant inside the spacer is spent. We order a replacement IGU to the exact dimensions of the opening, swap the glass, and verify the new seal under direct sunlight before we call the job done. Off-the-shelf generic glass does not have the same low-E coating spec, and we will not install it on a PGT frame.
- PGT 550 series roof windows with worn operators and sagging arms. The 550 line’s crank mechanism and hinge arms take the brunt of every afternoon thunderstorm that rolls through Palm Beach Gardens. When the arms sag, the sash doesn’t seat squarely, and that’s when you get air leaks and the first water stains on the ceiling. We replace the operator and both hinge arms as a matched set, reset the sash, and test the open-close cycle ten times before we leave.
- PGT Eze-Breeze roof panels failing at the spline channel. This is a system-specific issue: the flexible spline that holds the panel in the aluminum channel degrades from heat and sun, the panel gets loose, and high wind works it free. We re-spline with the correct gauge for the channel, not a one-size-fits-all substitute, and replace the weatherseal around the perimeter at the same time. A loose Eze-Breeze panel in a tropical storm becomes a missile.
- PGT roof flashing failures from original installations. More than half the PGT roof leaks we see in Palm Beach Gardens have nothing wrong with the window itself. The flashing was underlapped, or the original installer used roofing cement instead of proper step flashing. We re-flash to the manufacturer’s specification, which means removing shingles or tile around the curb, laying new metal in the correct sequence, and re-bedding everything. The window was never the problem. The installation was.
Our PGT Roof Replacement & Installation Process
Every PGT job follows the same unhurried sequence. No shortcuts, no skipped steps, no surprises on the bill.
- 1
The call. You reach a live person. We ask what you’re seeing: water, fogging, a crank that won’t turn. We schedule the diagnostic visit at a time that works for you.
- 2
The diagnostic. A background-checked, uniformed technician inspects the unit, the curb, the flashing, and the surrounding roof penetration. We measure every opening twice, per our standard practice. You get a written diagnosis and a line-item quote, OEM and quality aftermarket options listed side by side on paper.
- 3
The parts decision. For PGT products, OEM is usually the right call if the unit is under warranty or within ten years old. If the unit is older, a quality aftermarket part often makes more financial sense. We show you the difference, the price difference, and the warranty difference, and you decide with full information.
- 4
The work. We schedule the replacement, arrive when we say, and do the job as if we were working in our own mother’s house: drop cloths down, work area sealed, cleanup done before we knock on your door to show you the finished work.
- 5
The test. We run the unit through its full cycle, check the seal with a water test where the installation permits it, verify the flashing, and walk the area with you before we call the job complete.
- 6
The paperwork. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway. You get a copy. We keep a copy. If it’s not in the written scope, it’s not in the price - and if it’s in the price, we stand behind it.
What PGT Roof Replacement & Installation Costs in Palm Beach Gardens
Here are honest numbers for the PGT roof work we do most often in Palm Beach Gardens. These are total installed prices, not “starting at” bait.
| Job | Typical Range | What Moves It |
|---|---|---|
| Replace PGT WinGuard roof-mount unit (standard 2×4 opening) | $1,800 - $3,400 | Curb condition, tile vs. shingle roof, access height |
| PGT PremierVue IGU replacement (fogged glass only) | $850 - $1,600 | Glass size, low-E spec, whether frame needs re-bedding |
| PGT 550 series operator and hinge arm replacement | $350 - $650 per unit | Number of arms, whether sash needs re-alignment |
| PGT Eze-Breeze re-spline and weatherseal (per panel) | $200 - $450 per panel | Panel count, channel condition, scaffolding need |
| Full re-flash of existing PGT roof unit | $900 - $2,100 | Access, roofing material, extent of dry rot discovered |
| Complete PGT roof window replacement (new unit, full install, flashing) | $2,800 - $4,800 | Unit size, series (WinGuard premium vs. standard), roof condition |
Two things move the price more than anything else: what we find when we open the roof penetration, and whether the existing flashing was installed correctly the first time. We quote what we see in writing. If we find rot once we open it up, you’ll know before we proceed, not after. Call (772) 794-8169 for a free estimate on your PGT roof work.
Why Palm Beach Gardens Homeowners Call TruePane Windows & Doors for PGT Work
We’ve served local communities since 2008, and Dale Kessler, our owner, grew up off Northlake Boulevard - he knows Palm Beach Gardens as a working town first and a resort town second. That matters when you’re deciding who to trust with a roof penetration that has to hold through the next hurricane. Every PGT job we do carries the Done Right Promise: if it is not done right, we make it right, no paperwork fights and no arguing. The Keystone Standard backs that up - both manufacturer warranty layers registered in writing, durations stated, before our truck leaves the driveway. And if your PGT product can’t be saved, we’re authorized installers for more than a dozen manufacturer lines including CGI, CWS, ES Windows, and ECO Window Systems, so we’ll quote you a real replacement, side by side, on paper. A live person answers our phone 24 hours a day, seven days a week. If the pane is not true, the job is not done.
FAQs
Most PGT products carry a limited lifetime warranty on the frame and a separate warranty on the glass, but the installation workmanship is only covered if the original installer registered the warranty and is still in business to honor it. We are an independent PGT service provider, not a PGT warranty agent. We will pull your warranty documentation, tell you exactly what’s covered in writing, and register both warranty layers on any PGT product we install. Call (772) 794-8169 and have your original paperwork ready if you can find it.
Common PGT parts like operators, hinge arms, and spline are usually available within 3 to 5 business days. Full replacement units or custom-size IGUs run 2 to 4 weeks depending on the series and glass spec. We will not pull a unit off your roof until the replacement is physically in our warehouse. Your home stays weathertight.
If the frame is solid, the curb is dry, and the failure is a part we can replace - an operator, a hinge arm, a spline, or a glass pack - repair makes sense. If the frame is corroded through the corners, the curb has rot, or the unit is more than 20 years old in a salt-air exposure, replacement is usually the better four-figure decision than chasing good money after a tired install. We’ll show you both numbers in writing.
Only if we find something we could not see from the outside, like dry rot in the curb, and we will stop and show you before we spend another dollar. Our quotes are line-item and our fixed pricing means no surprise line items on the final bill. If it is not in the written scope, it is not in the price. That’s a square deal, and it’s the only way we work. Call (772) 794-8169 to schedule a free estimate.
Yes, when the job requires one, and we recognize Palm Beach Gardens building code requirements for roof penetrations and wind-load ratings. A PGT roof unit in a high-velocity hurricane zone is not a handyman job. If the work needs a permit, we pull it, we schedule the inspection, and we stay until it passes.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Palm Beach Gardens and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.