Awning Windows

Awning Windows in Palm Beach Gardens, FL | TruePane Windows & Doors

Awning windows hinge at the top and crank outward, which means you can leave them open during a Florida afternoon shower without water pouring onto the sill. That simple geometry is why so many homeowners in Palm Beach Gardens choose them for kitchens, bathrooms, and anywhere else ventilation matters year-round. TruePane Windows & Doors has installed impact-rated awning windows across Palm Beach Gardens since we started serving the area, and we carry this profile through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. Every installation follows HVHZ-compliant practice. Call (772) 794-8169 to talk through your project.

Call (772) 794-8169

Product Overview - Awning Windows

An awning window is a top-hinged, crank-out unit. The sash opens outward from the bottom, creating a sloped shield above the opening. Rain hits the glass and runs off to the sides. Air still moves through the gap. In Palm Beach Gardens, where humidity sits heavy nine months of the year and afternoon squalls roll through without warning, that ventilation-without-leaks behavior is the whole appeal.

The impact version of this window pairs that everyday function with laminated impact glass in a weathertight frame. The glass itself is the first line of defense in a storm: a polyvinyl butyral (PVB) interlayer holds the pane together if something hits it, so the window stays sealed even when the glass fractures. Behind the glass, the frame and hardware are engineered for the high-velocity hurricane zone construction standards Palm Beach Gardens falls under.

Architecturally, awning windows fit Florida homes well. They sit narrow and tall above counters, under soffits, in ganged arrangements across a back wall, or above fixed picture windows where you want light plus air. They also outperform older jalousie windows, which Palm Beach Gardens still has plenty of, by sealing tight when closed and shedding water when open. Not every window profile does both. This one does.

Technical Specifications

Awning windows in our impact series are configured per opening, per wind zone, per finish. Here’s what we work with:

• Frame materials: Aluminum or vinyl, selected for the opening and exposure
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, clear glass
• Color and finish options: White, almond, bronze, black, tan
• Screen options: Fixed screen or retractable screen
• Operation: Crank-out sash, top-hinged
• Design pressure: Matched to your wind zone, up to +/-100. We do not spec higher than the opening actually needs.

Sizes are cut per rough opening during the site measure. Wide units work well over sinks. Tall narrow units suit bathrooms where privacy glass matters. We will walk you through what each glass and finish combination costs during the quote.

Hurricane & Compliance Performance

What makes this an impact window, rather than a standard awning window with storm panels added, is the way the whole assembly works together. Here are the six things we verify on every awning window we order and install in Palm Beach Gardens.

Laminated Impact Glass
The glass carries a PVB interlayer that holds fragments in place on impact. The window can crack and still keep wind, water, and debris on the outside, which is what the Florida codes actually require of an opening protection system.

Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade Notice of Acceptance and Florida Product Approval number. These are issued per configuration, not per product family, so we verify the specific numbers on your quote before you sign.

FBC / HVHZ Compliance
Awning windows in this series are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. Palm Beach Gardens sits within the HVHZ map, so every unit we quote here has to meet that bar.

TAS 201 / 202 / 203 Testing Context
HVHZ-rated products in this category are tested under a protocol family: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. The awning windows we install have that testing behind them.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100. We never spec higher than the site requires, because that adds cost with no code benefit. The engineered value comes from the permit package for your specific address.

Energy Performance
Low-E insulated glass options are available for these awning windows, which helps with afternoon sun load on west-facing walls. Tinted and clear glass round out the range depending on whether your priority is glare control, clarity, or both.

Color & Glass Options

Finish selection in Palm Beach Gardens usually comes down to what the rest of the house already says. White and almond dominate older Florida homes and condos where the trim color sets the palette. Bronze and black show up increasingly on newer construction and contemporary remodels, and they photograph well against stucco. Tan splits the difference for Mediterranean-style exteriors where a pure white would feel too stark. All five finishes are available on these awning windows.

On the glass side, clear laminated impact glass gives you the most natural light and a neutral view. Tinted glass cuts glare in rooms that face the afternoon sun. Low-E insulated glass layers thermal performance onto the impact assembly, which matters in Palm Beach Gardens bedrooms and kitchen nooks that take direct western exposure. We order each unit per opening, so mixed glass selections across a house are common and perfectly doable.

Installation by TruePane Windows & Doors in Palm Beach Gardens

A hurricane-rated window is only as good as the hole it sits in. The NOA and Florida Product Approval numbers apply to the product, but the building department cares about the installation as much as the glass. An awning window that is out of square or poorly sealed will leak, bind, or worse, compromise the entire opening protection system when it matters most.

Our installation practice starts with a pre-install inspection of the rough opening. We check the framing condition, look for water intrusion that predates the window, and confirm the opening dimensions against the order before anything gets set. Then we set each unit level, plumb, and square. On an awning window, square matters twice, because a slight rack in the frame will show up as a handle that binds or a corner that never seals fully.

Perimeter sealing follows AAMA 812 practice using low-expansion foam sealant, which fills the gap without bowing the frame. Flashing and sill treatment follow AAMA 2400/2410 installation practice so water gets directed out, not trapped. We finish with a water test on each unit, clean the job, and walk the property with you. For permit submittals in Palm Beach Gardens, we provide the product approval documentation your permit package needs. Coastal exposure, wind zone, and local amendments all factor into what gets specified, and we would rather spend an extra hour on the inspection than learn about a problem after the inspector leaves.

Frequently Asked Questions - Awning Windows

What wind zone or design pressure is the awning window rated for?
Design pressure is matched to your wind zone up to +/-100, never higher than the site requires. The specific rating for your opening comes from the permit package and the property’s location in Palm Beach Gardens. Call (772) 794-8169 and we’ll confirm what your address needs.

What is the lead time on awning windows?
Lead time depends on the manufacturer line, glass package, and finish. Standard configurations move faster than custom sizes with mixed glass. We confirm timing when the quote is issued so you can plan around it.

Does my permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes, in nearly every case for replacement windows in Palm Beach Gardens. We pull the specific NOA and Florida Product Approval numbers for your configuration and include them in the permit package. Call (772) 794-8169 if you need documentation before the quote.

Can I customize the size or configuration of my awning windows?
Sizes are cut to your rough openings, so the window fits the house rather than the other way around. Ganged arrangements, mixed glass, and specific finishes are all common requests we accommodate. We’ll verify what the manufacturing line allows for each configuration.

How do I maintain the awning window frame and hardware?
Wash the frame with mild soap and water a few times a year, especially after coastal weather moves through. Lubricate the crank mechanism and hinges with a silicone-based product. Keep the sill track clear of sand and debris, and check the gasket seal annually. Call (772) 794-8169 if a unit starts binding or leaking and we’ll inspect it.

Get a Quote - Awning Windows in Palm Beach Gardens

If you’re replacing windows in Palm Beach Gardens, awning windows deserve a serious look, particularly in kitchens, baths, and anywhere with short walls and long humidity. TruePane Windows & Doors will measure your openings, spec the right glass and finish, and quote the job with the product approval numbers included. Call (772) 794-8169 to schedule your free on-site measurement and start the project.

Written by the team at TruePane Windows & Doors, serving Palm Beach Gardens, FL.