Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Westgate
Door installation in Westgate, FL comes down to one thing more than any other: whether the unit carries a Florida Product Approval number Palm Beach County will actually sign off on. We’ve been setting doors in this unincorporated pocket of the county long enough to know the inspection timeline, the product-approval lookup, and the specific ways a 1960s concrete-block opening fights back. If you’re in Westgate and need a front entry, storm door, or impact-rated replacement that passes county inspection the first time, call TruePane Windows & Doors at (772) 794-8169. We’ll walk you through exactly what the job requires.
Why TruePane Windows & Doors Is Westgate’s Preferred Door Installation Company
Westgate is a different animal than the incorporated cities around it. Permits don’t go through a city building department. They route through the Palm Beach County Building Division in West Palm Beach, and the inspection portal has its own rhythm and its own paperwork. A contractor who doesn’t know that will burn two or three weeks figuring it out on your dime. We already know it. Our crews work off Westgate Avenue, Haverhill Road, and the side streets off Okeechobee, and we’ve handled enough 1950s-1970s CBS homes to know what’s behind the jamb before we pull it.
TruePane was founded by second-generation glazier Dale Kessler on a simple rule: if the pane is not true, the job is not done. That standard applies to every door we hang in Westgate. Our technicians are background-checked and uniformed, and they measure every opening twice before a quote is written. We don’t send a salesman. We send a glazier who knows what a rotted wood buck looks like from twenty feet away.
Homeowners in Westgate call us because we’re local, we answer the phone, and we register both manufacturer warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s backed by our Done Right Promise: if it’s not done right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
Our Door Installation Services in Westgate
Entry & Swing Doors
A front entry door in Westgate has to do more than open and close. It has to hold up to hurricane-driven wind, subtropical humidity, and a concrete-block jamb that may or may not have a proper wood buck behind it. We install in-swing and out-swing entry doors sized to the original rough opening, and when the block needs patching or a new buck built, that work happens before the new frame goes in. Most entry door installations in Westgate run $1,800 to $4,600 depending on slab construction, glass package, and whether the opening needs masonry remediation.
Double & French Doors
Double and French doors in Westgate typically go on the rear elevation or a patio, where wind-driven rain is the enemy. We set these with continuous sill flashing and urethane foam around the full perimeter of the jamb, because the county inspector will look for exactly that on a concrete-block opening. A pair of impact-rated French doors with laminated glass and active locking hardware in Westgate generally falls between $3,500 and $7,800 installed. We quote manufacturer lines side by side on paper so you see exactly what you’re buying.
Bifold & Folding Doors
Bifold and folding doors open up a Westgate living room to a backyard, but they’re also the most inspection-sensitive doors we install. The roller track, the header load, the interlocking stiles: every piece has to be rated and documented. In a CBS home where the header is poured concrete, anchoring the top track correctly is the difference between a door that glides for twenty years and one that sags in three. Bifold door installations in Westgate start around $4,200 and run up from there based on panel count and glass package.
Pivot Doors
Pivot doors are the heaviest single leaf we set, and Westgate’s older slabs sometimes need a structural header upgrade to carry the load. The pivot hinge system distributes weight differently than traditional butt hinges, which means the rough opening, the floor anchor, and the header all have to be spec’d correctly before the door is ordered. A custom pivot entry in Westgate typically runs $5,000 to $9,000 installed, with the window for a fully custom unit stretching higher. We don’t guess on these. We measure, we spec, and we put it in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We’re an authorized installer for more than a dozen manufacturer lines, and for Westgate’s permit environment, that matters. When we quote a PGT impact-rated front door or a CGI storm door, we pull the Florida Product Approval listing from the manufacturer’s current NOA documentation, not from memory. We also work with Ply Gem, CWS, and ES Windows for homeowners who want a specific look or a tighter budget line. Because Westgate permit approvals live in a county system, we verify every product number before the order is placed, not after delivery. That’s part of why our installs pass inspection the first time.
If you need Door Installation from a team that stocks the right flashing, sealants, and anchors for Palm Beach County block construction, TruePane is who Westgate homeowners call.
Common Door Installation Problems We See in Westgate Homes
Westgate’s housing stock is mostly concrete block, built fast between the 1950s and 1970s. That creates a repeatable set of problems we see on nearly every job. Here’s what we run into:
- Rotted wood bucks buried in the block. The original door frame was often set into a wood buck that’s been absorbing humidity for fifty years. When we pull the old jamb, the buck comes out in chunks, and the block behind it needs patching and backfill before anything new can be set. Skip that step and the new frame rots from the back in two seasons.
- Florida Product Approval number missing or wrong. A unit that passed inspection in West Palm Beach won’t pass in unincorporated Westgate if it’s not on Palm Beach County’s accepted product list. We’ve seen inspectors fail a door on the spot for a missing NOA sticker. We verify that before the door is ordered.
- Wind-driven rain wicking through skipped flashing. On a concrete-block opening, the gap between the jamb and the block needs urethane foam and flashing tape done right, or water finds its way into the block and rots what’s behind it. Westgate gets enough tropical downpours to make this a when, not an if.
- Original aluminum sliders and jalousie doors sized for a world before impact codes. The rough opening in a 1950s Westgate home was sized for a thin aluminum frame, not a modern impact-rated unit. Swapping in a wider, heavier door often means masonry patching, new backer, and a reworked threshold. That work is part of a compliant quote. A cheap quote leaves it out and gets surprised on install day.
Pricing for Door Installation in Westgate, FL
A standard impact-rated front entry door in Westgate runs $1,800 to $4,600 installed, depending on glass package, slab construction, and how much masonry remediation the opening needs. Storm doors fall between $900 and $2,200. Double and French doors typically land at $3,500 to $7,800. Pivot doors start around $5,000 and go up based on size and hardware. These are real numbers from doors we’ve actually set in Westgate, not a national average.
What moves the price in Westgate specifically is the condition of the opening. Older CBS homes on Westgate Avenue or off Haverhill often need a new wood buck, backfill, and sill work before the door goes in. That’s not something a cheap quote will mention. Ours will, in writing, before you sign. We also offer a permanent 5% discount for seniors and veterans, a free written repair estimate, and a maintenance check for existing doors. Call (772) 794-8169 and we’ll put a firm number in front of you.
We Also Serve Cities Near Westgate
TruePane serves homeowners throughout northern Palm Beach County and the surrounding coast. If you’re researching Door Installation in Westgate, you’re likely close enough that our crew can look at the job in person. We regularly work in Palm Beach Gardens, Jupiter, Tequesta, and Juno Beach as well. Same crew, same Keystone Standard, same phone number.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Westgate
Yes. Westgate is unincorporated Palm Beach County, and the county’s wind-load requirements don’t distinguish between waterfront and inland homes the way some city codes do. Any door that’s part of the building envelope, meaning it separates conditioned space from the outdoors, has to meet the county’s impact-rating standard and carry a Florida Product Approval or Miami-Dade NOA listing. If you’re replacing an original 1960s aluminum slider or jalousie door, the new unit has to be brought up to current code regardless of how far you are from the ocean. Call (772) 794-8169 and we’ll look up your specific opening and tell you exactly what the inspector will look for.
In Westgate, door permits go through the Palm Beach County Building Division in West Palm Beach, not a city hall. For a standard door swap, plan on one to three weeks for permit review, depending on the division’s backlog. For homes that need wind-mitigation documentation or a structural header upgrade, the review can stretch to three or four weeks. City permits in West Palm Beach often route through a different portal with its own timeline, which is why a contractor who works mostly inside the city limits will sometimes file in the wrong jurisdiction entirely. We file with the county every week, so the paperwork doesn’t stall the job.
Yes, in most cases it will, but only if the door carries a Florida Product Approval or Miami-Dade NOA number and the permit closes with a passed final inspection. The wind-mitigation credit you qualify for after that can cut your annual premium by hundreds of dollars, sometimes more, depending on your carrier and what other openings are already documented. What kills the credit is a door that wasn’t impact-rated, or a non-compliant unit with no county sign-off, or an inspection that never got scheduled because the contractor didn’t know the county system. To get the insurance value out of a new Westgate door, the paperwork has to be as correct as the install. We register both warranty layers in writing and walk you through the county’s wind-mitigation documentation before we leave the driveway. For an exact number on a specific door, call (772) 794-8169.
Yes, but the opening has to be reworked first. A 1950s Westgate home with a jalousie door set directly into concrete block doesn’t have the rough opening or the mounting surface a modern impact-rated unit needs. We build a new pressure-treated wood buck into the block, patch the masonry around it, and set the new door to the corrected rough opening. It’s more work than a standard swap, which is why the quote will include that scope in writing. We replaced a rotted wood buck on a 1960s CBS home off Westgate Avenue where the original aluminum slider had warped from subtropical humidity. Our crew pulled the old jamb, patched the block with backfill, and set a ViewLux impact-rated front entry with laminated low-E glass and argon fill, then walked the homeowner through the county’s inspection checklist for the NOA sticker. That’s the work a compliant quote includes and a cheap one quietly skips.
Check three things. First, the door unit needs a Florida Product Approval or Miami-Dade NOA number that’s current on Palm Beach County’s accepted list. Second, the quote has to include flashing and sealant scope for a concrete-block opening, because the county inspector will look for it. Third, the permit has to be filed with Palm Beach County Building Division, not a city building department. If the quote is missing any of those three, the job will likely fail inspection or stall at review. We put all three in writing on every Westgate quote, because we want the job to pass the first time and the insurance paperwork to be right. To get a firm, line-item quote on your specific door, call (772) 794-8169. Estimates are free.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westgate and surrounding Palm Beach County communities with years of glazing heritage.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.